On Sun, 2017-02-19 at 22:41 +0100, Martin Blumenstingl wrote: > This series adds the reset GPIOs for the (external) ethernet PHYs on > all > GXBB boards. > Additionally it provides a ethernet PHY node which can be used to > specify > PHY-specific properties (this may be required if more boards require > the > "eee-broken-1000t" for the RTL8211F ethernet PHY). To make all board > .dts > consistent I chose to add the PHY node also for boards which don't > have a > RTL8211F PHY. > Looks good to me. For the patchset: Reviewed-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx> > > Martin Blumenstingl (9): > ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO > ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO > ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO > ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset > GPIO > ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO > ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset > GPIO > ARM64: dts: meson-gxbb-p201: fix ethernet support > ARM64: dts: amlogic: add the ethernet TX delay configuration > ARM64: dts: meson-gx: remove the phy-mode property from meson-gx > > arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 1 - > .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 17 > ++++++++++++++ > .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 7 ++++++ > arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 25 > +++++++++++++++++++++ > arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts | 11 +++++++++ > arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 6 ----- > .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 21 > ++++++++++++++++- > .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 26 > ++++++++++++++++++++++ > .../boot/dts/amlogic/meson-gxbb-wetek-play2.dts | 26 > ++++++++++++++++++++++ > .../boot/dts/amlogic/meson-gxl-s905d-p230.dts | 2 ++ > .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 2 ++ > arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts | 2 ++ > 12 files changed, 138 insertions(+), 8 deletions(-) > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
