As per JEDEC spec - CMD5 can be used to awake from sleep mode for emmc. This patch series provide CMD5(awake) + mmc_partial_init support to resume mmc card device. This is mainly to reduce the resume time. This was tested on db410c (emmc with HS200 mode) and MS8996 (emmc with HS400ES) based internal board. This patch reduced the resume time by ~50% on msm8996 and ~11% on db410c. As of now this patch series provides a caps (MMC_CAP2_SLEEP_AWAKE) to enable this feature. Since there is no dependency on host platform for this, we can enable this feature by default as well. Thoughts? Ritesh Harjani (4): Documentation: mmc: add mmc-sleep-awake mmc: core: add mmc-sleep-awake caps mmc: mmc: add support for CMD5 awake mmc: core: Implement mmc_partial_init during resume Documentation/devicetree/bindings/mmc/mmc.txt | 2 + drivers/mmc/core/core.c | 13 +++ drivers/mmc/core/core.h | 1 + drivers/mmc/core/host.c | 2 + drivers/mmc/core/mmc.c | 160 ++++++++++++++++++++++++-- include/linux/mmc/card.h | 3 + include/linux/mmc/host.h | 2 + 7 files changed, 176 insertions(+), 7 deletions(-) -- The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
