Add basic devicetree files for Parvus Duracor C310 which is a custom carrier with MXM3 connector for SMARC module. SMARC module used in C310 is manufactured by Kontron AG. Priit Laes (4): arm: defconfig: imx6: Added CONFIG_FHANDLE devicetree: Add vendor prefix for Kontron AG arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module arm: dts: imx: Basic board definition for Parvus Duracor C310 .../devicetree/bindings/vendor-prefixes.txt | 3 +- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-parvus-duracor-310.dts | 119 ++++++ arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi | 434 +++++++++++++++++++++ arch/arm/configs/imx_v6_v7_defconfig | 1 + 5 files changed, 557 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/imx6q-parvus-duracor-310.dts create mode 100644 arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
