Juno platforms have a programmable replicator splitting the trace output to
TPIU and ETR. Currently this is not being programmed as it is being treated
as a none-programmable replicator - which is the default operational mode
for these devices. The TPIU in the system is enabled by default, and this
combination is causing back-pressure in the trace system resulting in
overflows at the source.
Replaces the existing definition with one that defines the programmable
replicator, using the "qcom,coresight-replicator1x" driver that provides
the correct functionality for CoreSight programmable replicators.
Signed-off-by: Mike Leach <mike.leach@xxxxxxxxxx>
---
arch/arm64/boot/dts/arm/juno-base.dtsi | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 9d799d9..6546e23 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -372,12 +372,14 @@
};
};
- coresight-replicator {
- /*
- * Non-configurable replicators don't show up on the
- * AMBA bus. As such no need to add "arm,primecell".
- */
- compatible = "arm,coresight-replicator";
+ coresight-replicator@20120000 {
+
+ compatible = "qcom,coresight-replicator1x", "arm,primecell";
+ reg = <0 0x20120000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
ports {
#address-cells = <1>;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
