According to the firmware DT blob [1] the RPi 3 uses different pins for i2c0 and pwm. [1] - https://github.com/raspberrypi/firmware/blob/master/extra/dt-blob.dts Fixes: 9d56c22a7861 ("ARM: bcm2835: Add devicetree for the Raspberry Pi 3.") Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx> --- arch/arm64/boot/dts/broadcom/bcm2837-rpi.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi.dtsi b/arch/arm64/boot/dts/broadcom/bcm2837-rpi.dtsi index 6ddf7df..9f3f3ed 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi.dtsi @@ -46,7 +46,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_gpio0>; + pinctrl-0 = <&i2c0_gpio44>; status = "okay"; clock-frequency = <100000>; }; @@ -71,7 +71,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; status = "okay"; }; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
