Re: [PATCH] ARM: dts: armada-38x add node labels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Chris,
 
 On mer., févr. 01 2017, Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> wrote:

> As was done with Armada XP, add node labels to Armada 38x common and SoC
> specific nodes to make them easier to reference in board device trees.

Applied on mvebu/dt-4.12

Thanks,

Gregory
>
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/armada-385.dtsi | 20 +++++++++-----------
>  arch/arm/boot/dts/armada-388.dtsi |  9 ++++-----
>  arch/arm/boot/dts/armada-38x.dtsi | 38 +++++++++++++++++++-------------------
>  3 files changed, 32 insertions(+), 35 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
> index 8e63be33472e..7fcc4c4885cf 100644
> --- a/arch/arm/boot/dts/armada-385.dtsi
> +++ b/arch/arm/boot/dts/armada-385.dtsi
> @@ -70,13 +70,7 @@
>  	};
>  
>  	soc {
> -		internal-regs {
> -			pinctrl@18000 {
> -				compatible = "marvell,mv88f6820-pinctrl";
> -			};
> -		};
> -
> -		pcie-controller {
> +		pciec: pcie-controller {
>  			compatible = "marvell,armada-370-pcie";
>  			status = "disabled";
>  			device_type = "pci";
> @@ -106,7 +100,7 @@
>  			 * configured in x4 by the bootloader, then
>  			 * pcie@4,0 is not available.
>  			 */
> -			pcie@1,0 {
> +			pcie1: pcie@1,0 {
>  				device_type = "pci";
>  				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
>  				reg = <0x0800 0 0 0 0>;
> @@ -124,7 +118,7 @@
>  			};
>  
>  			/* x1 port */
> -			pcie@2,0 {
> +			pcie2: pcie@2,0 {
>  				device_type = "pci";
>  				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
>  				reg = <0x1000 0 0 0 0>;
> @@ -142,7 +136,7 @@
>  			};
>  
>  			/* x1 port */
> -			pcie@3,0 {
> +			pcie3: pcie@3,0 {
>  				device_type = "pci";
>  				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
>  				reg = <0x1800 0 0 0 0>;
> @@ -163,7 +157,7 @@
>  			 * x1 port only available when pcie@1,0 is
>  			 * configured as a x1 port
>  			 */
> -			pcie@4,0 {
> +			pcie4: pcie@4,0 {
>  				device_type = "pci";
>  				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
>  				reg = <0x2000 0 0 0 0>;
> @@ -182,3 +176,7 @@
>  		};
>  	};
>  };
> +
> +&pinctrl {
> +	compatible = "marvell,mv88f6820-pinctrl";
> +};
> diff --git a/arch/arm/boot/dts/armada-388.dtsi b/arch/arm/boot/dts/armada-388.dtsi
> index 564fa5937e25..1c0d151b2aaa 100644
> --- a/arch/arm/boot/dts/armada-388.dtsi
> +++ b/arch/arm/boot/dts/armada-388.dtsi
> @@ -50,13 +50,8 @@
>  	model = "Marvell Armada 388 family SoC";
>  	compatible = "marvell,armada388", "marvell,armada385",
>  		"marvell,armada380";
> -
>  	soc {
>  		internal-regs {
> -			pinctrl@18000 {
> -				compatible = "marvell,mv88f6828-pinctrl";
> -			};
> -
>  			sata@e0000 {
>  				compatible = "marvell,armada-380-ahci";
>  				reg = <0xe0000 0x2000>;
> @@ -68,3 +63,7 @@
>  		};
>  	};
>  };
> +
> +&pinctrl {
> +	compatible = "marvell,mv88f6828-pinctrl";
> +};
> diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
> index 79b767507eab..c558a5d6a21f 100644
> --- a/arch/arm/boot/dts/armada-38x.dtsi
> +++ b/arch/arm/boot/dts/armada-38x.dtsi
> @@ -82,7 +82,7 @@
>  			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
>  		};
>  
> -		devbus-bootcs {
> +		devbus_bootcs: devbus-bootcs {
>  			compatible = "marvell,mvebu-devbus";
>  			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
>  			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
> @@ -92,7 +92,7 @@
>  			status = "disabled";
>  		};
>  
> -		devbus-cs0 {
> +		devbus_cs0: devbus-cs0 {
>  			compatible = "marvell,mvebu-devbus";
>  			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
>  			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
> @@ -102,7 +102,7 @@
>  			status = "disabled";
>  		};
>  
> -		devbus-cs1 {
> +		devbus_cs1: devbus-cs1 {
>  			compatible = "marvell,mvebu-devbus";
>  			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
>  			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
> @@ -112,7 +112,7 @@
>  			status = "disabled";
>  		};
>  
> -		devbus-cs2 {
> +		devbus_cs2: devbus-cs2 {
>  			compatible = "marvell,mvebu-devbus";
>  			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
>  			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
> @@ -122,7 +122,7 @@
>  			status = "disabled";
>  		};
>  
> -		devbus-cs3 {
> +		devbus_cs3: devbus-cs3 {
>  			compatible = "marvell,mvebu-devbus";
>  			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
>  			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
> @@ -339,7 +339,7 @@
>  					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
>  			};
>  
> -			system-controller@18200 {
> +			systemc: system-controller@18200 {
>  				compatible = "marvell,armada-380-system-controller",
>  					     "marvell,armada-370-xp-system-controller";
>  				reg = <0x18200 0x100>;
> @@ -373,7 +373,7 @@
>  				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
>  			};
>  
> -			timer@20300 {
> +			timer: timer@20300 {
>  				compatible = "marvell,armada-380-timer",
>  					     "marvell,armada-xp-timer";
>  				reg = <0x20300 0x30>, <0x21040 0x30>;
> @@ -387,14 +387,14 @@
>  				clock-names = "nbclk", "fixed";
>  			};
>  
> -			watchdog@20300 {
> +			watchdog: watchdog@20300 {
>  				compatible = "marvell,armada-380-wdt";
>  				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
>  				clocks = <&coreclk 2>, <&refclk>;
>  				clock-names = "nbclk", "fixed";
>  			};
>  
> -			cpurst@20800 {
> +			cpurst: cpurst@20800 {
>  				compatible = "marvell,armada-370-cpu-reset";
>  				reg = <0x20800 0x10>;
>  			};
> @@ -404,12 +404,12 @@
>  				reg = <0x20d20 0x6c>;
>  			};
>  
> -			coherency-fabric@21010 {
> +			coherencyfab: coherency-fabric@21010 {
>  				compatible = "marvell,armada-380-coherency-fabric";
>  				reg = <0x21010 0x1c>;
>  			};
>  
> -			pmsu@22000 {
> +			pmsu: pmsu@22000 {
>  				compatible = "marvell,armada-380-pmsu";
>  				reg = <0x22000 0x1000>;
>  			};
> @@ -451,7 +451,7 @@
>  				status = "disabled";
>  			};
>  
> -			usb@58000 {
> +			usb0: usb@58000 {
>  				compatible = "marvell,orion-ehci";
>  				reg = <0x58000 0x500>;
>  				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> @@ -459,7 +459,7 @@
>  				status = "disabled";
>  			};
>  
> -			xor@60800 {
> +			xor0: xor@60800 {
>  				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
>  				reg = <0x60800 0x100
>  				       0x60a00 0x100>;
> @@ -479,7 +479,7 @@
>  				};
>  			};
>  
> -			xor@60900 {
> +			xor1: xor@60900 {
>  				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
>  				reg = <0x60900 0x100
>  				       0x60b00 0x100>;
> @@ -507,7 +507,7 @@
>  				clocks = <&gateclk 4>;
>  			};
>  
> -			crypto@90000 {
> +			cesa: crypto@90000 {
>  				compatible = "marvell,armada-38x-crypto";
>  				reg = <0x90000 0x10000>;
>  				reg-names = "regs";
> @@ -522,7 +522,7 @@
>  				marvell,crypto-sram-size = <0x800>;
>  			};
>  
> -			rtc@a3800 {
> +			rtc: rtc@a3800 {
>  				compatible = "marvell,armada-380-rtc";
>  				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
>  				reg-names = "rtc", "rtc-soc";
> @@ -561,13 +561,13 @@
>  				clock-output-names = "nand";
>  			};
>  
> -			thermal@e8078 {
> +			thermal: thermal@e8078 {
>  				compatible = "marvell,armada380-thermal";
>  				reg = <0xe4078 0x4>, <0xe4074 0x4>;
>  				status = "okay";
>  			};
>  
> -			flash@d0000 {
> +			nand: flash@d0000 {
>  				compatible = "marvell,armada370-nand";
>  				reg = <0xd0000 0x54>;
>  				#address-cells = <1>;
> @@ -577,7 +577,7 @@
>  				status = "disabled";
>  			};
>  
> -			sdhci@d8000 {
> +			sdhci: sdhci@d8000 {
>  				compatible = "marvell,armada-380-sdhci";
>  				reg-names = "sdhci", "mbus", "conf-sdio3";
>  				reg = <0xd8000 0x1000>,
> -- 
> 2.11.0.24.ge6920cf
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux