From: Raju Lakkaraju <Raju.Lakkaraju@xxxxxxxxxxxxx> LED Mode: Microsemi PHY support 2 LEDs (LED[0] and LED[1]) to display different status information that can be selected by setting LED mode. LED Mode parameter (vsc8531, led-0-mode) and (vsc8531, led-1-mode) get from Device Tree. Tested on Beaglebone Black with VSC 8531 PHY. Change set: v0: - Initial version of LED driver for Microsemi PHYs. v1: - Update all review comments given by Andrew. - Add new header file "mscc-phy-vsc8531.h" to define DT macros. - Add error/range check for DT LED mode input Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@xxxxxxxxxxxxx> Raju Lakkaraju (1): net: phy: Add LED mode driver for Microsemi PHYs. .../devicetree/bindings/net/mscc-phy-vsc8531.txt | 10 +++ drivers/net/phy/mscc.c | 85 +++++++++++++++++++++- include/dt-bindings/net/mscc-phy-vsc8531.h | 29 ++++++++ 3 files changed, 123 insertions(+), 1 deletion(-) create mode 100644 include/dt-bindings/net/mscc-phy-vsc8531.h -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html