This commit adds the device tree binding document for
the mediatek cirq.
Signed-off-by: Youlin Pei <youlin.pei@xxxxxxxxxxxx>
---
.../interrupt-controller/mediatek,cirq.txt | 35 ++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
new file mode 100644
index 0000000..a7efdbc
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
@@ -0,0 +1,35 @@
+* Mediatek 27xx cirq
+
+In Mediatek SOCs, the CIRQ is a low power interrupt controller designed to
+work outside MCUSYS which comprises with Cortex-Ax cores,CCI and GIC.
+The external interrupts (outside MCUSYS) will feed through CIRQ and connect
+to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive
+interrupts and generate a pulse signal to parent interrupt controller when
+flush command is executed. With CIRQ, MCUSYS can be completely turned off
+to improve the system power consumption without losing interrupts.
+
+Required properties:
+- compatible: should be one of
+ - "mediatek,mt2701-cirq" for mt2701 CIRQ
+ - "mediatek,mt8135-cirq" for mt8135 CIRQ
+ - "mediatek,mt8173-cirq" for mt8173 CIRQ
+ and "mediatek,cirq" as a fallback.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
+- interrupt-parent: phandle of irq parent for cirq. The parent must
+ use the same interrupt-cells format as GIC.
+- reg: Physical base address of the cirq registers and length of memory
+ mapped region.
+- mediatek,ext-irq-range: Identifies external irq number range in different
+ SOCs.
+
+Example:
+ cirq: interrupt-controller@10204000 {
+ compatible = "mediatek,mt2701-cirq",
+ "mediatek,mtk-cirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&sysirq>;
+ reg = <0 0x10204000 0 0x400>;
+ mediatek,ext-irq-start = <32 200>;
+ };
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
