Hi Ramesh,
A few little nitpicks:
On 02/07/2017 04:02 PM, Ramesh Shanmugasundaram wrote:
> This patch adds driver support for the MAX2175 chip. This is Maxim
> Integrated's RF to Bits tuner front end chip designed for software-defined
> radio solutions. This driver exposes the tuner as a sub-device instance
> with standard and custom controls to configure the device.
>
> Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@xxxxxxxxxxxxxx>
> ---
> Documentation/media/v4l-drivers/index.rst | 1 +
> Documentation/media/v4l-drivers/max2175.rst | 60 ++
> drivers/media/i2c/Kconfig | 4 +
> drivers/media/i2c/Makefile | 2 +
> drivers/media/i2c/max2175/Kconfig | 8 +
> drivers/media/i2c/max2175/Makefile | 4 +
> drivers/media/i2c/max2175/max2175.c | 1438 +++++++++++++++++++++++++++
> drivers/media/i2c/max2175/max2175.h | 108 ++
> 8 files changed, 1625 insertions(+)
> create mode 100644 Documentation/media/v4l-drivers/max2175.rst
> create mode 100644 drivers/media/i2c/max2175/Kconfig
> create mode 100644 drivers/media/i2c/max2175/Makefile
> create mode 100644 drivers/media/i2c/max2175/max2175.c
> create mode 100644 drivers/media/i2c/max2175/max2175.h
>
<snip>
> +
> +static const struct v4l2_ctrl_config max2175_i2s_en = {
> + .ops = &max2175_ctrl_ops,
> + .id = V4L2_CID_MAX2175_I2S_ENABLE,
> + .name = "I2S Enable",
> + .type = V4L2_CTRL_TYPE_BOOLEAN,
> + .min = 0,
> + .max = 1,
> + .step = 1,
> + .def = 1,
> +};
> +
> +/*
> + * HSLS value control LO freq adjacent location configuration.
> + * Refer to Documentation/media/v4l-drivers/max2175 for more details.
> + */
> +static const struct v4l2_ctrl_config max2175_hsls = {
> + .ops = &max2175_ctrl_ops,
> + .id = V4L2_CID_MAX2175_HSLS,
> + .name = "HSLS above/below desired",
The convention is that the descriptions of controls follow the English 'title' rules
w.r.t. caps. See v4l2-ctrls.c.
This would become: "HSLS Above/Below Desired".
> + .type = V4L2_CTRL_TYPE_INTEGER,
Shouldn't this be a boolean control?
> + .min = 0,
> + .max = 1,
> + .step = 1,
> + .def = 1,
> +};
> +
> +/*
> + * Rx modes below are a set of preset configurations that decides the tuner's
> + * sck and sample rate of transmission. They are separate for EU & NA regions.
> + * Refer to Documentation/media/v4l-drivers/max2175 for more details.
> + */
> +static const char * const max2175_ctrl_eu_rx_modes[] = {
> + [MAX2175_EU_FM_1_2] = "EU FM 1.2",
> + [MAX2175_DAB_1_2] = "DAB 1.2",
> +};
> +
> +static const char * const max2175_ctrl_na_rx_modes[] = {
> + [MAX2175_NA_FM_1_0] = "NA FM 1.0",
> + [MAX2175_NA_FM_2_0] = "NA FM 2.0",
> +};
> +
> +static const struct v4l2_ctrl_config max2175_eu_rx_mode = {
> + .ops = &max2175_ctrl_ops,
> + .id = V4L2_CID_MAX2175_RX_MODE,
> + .name = "RX MODE",
MODE -> Mode.
> + .type = V4L2_CTRL_TYPE_MENU,
> + .max = ARRAY_SIZE(max2175_ctrl_eu_rx_modes) - 1,
> + .def = 0,
> + .qmenu = max2175_ctrl_eu_rx_modes,
> +};
> +
> +static const struct v4l2_ctrl_config max2175_na_rx_mode = {
> + .ops = &max2175_ctrl_ops,
> + .id = V4L2_CID_MAX2175_RX_MODE,
> + .name = "RX MODE",
Ditto.
> + .type = V4L2_CTRL_TYPE_MENU,
> + .max = ARRAY_SIZE(max2175_ctrl_na_rx_modes) - 1,
> + .def = 0,
> + .qmenu = max2175_ctrl_na_rx_modes,
> +};
> +
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
