On Thu, 9 Feb 2017 13:05:57 -0600
Rob Herring <robh@xxxxxxxxxx> wrote:
> Similar to the previous commit, convert drivers open coding OF graph
> parsing to use drm_of_find_panel_or_bridge instead.
>
> This changes some error messages to debug messages (in the graph core).
> Graph connections are often "no connects" depending on the particular
> board, so we want to avoid spurious messages. Plus the kernel is not a
> DT validator.
>
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> v2:
> - fix wrong node ptr in imx-ldb
> - build fixes in kirin and imx drivers
>
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c | 64 ++++-------------
> drivers/gpu/drm/bridge/nxp-ptn3460.c | 16 ++---
> drivers/gpu/drm/bridge/parade-ps8622.c | 16 ++---
> drivers/gpu/drm/bridge/tc358767.c | 27 +------
> drivers/gpu/drm/exynos/exynos_dp.c | 35 ++++-----
> drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c | 49 ++++---------
> drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c | 27 ++-----
> drivers/gpu/drm/imx/imx-ldb.c | 27 ++-----
> drivers/gpu/drm/imx/parallel-display.c | 36 ++--------
> drivers/gpu/drm/mediatek/mtk_dsi.c | 23 ++----
> drivers/gpu/drm/mxsfb/mxsfb_out.c | 36 ++--------
> drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 26 ++-----
> drivers/gpu/drm/sun4i/sun4i_rgb.c | 13 ++--
> drivers/gpu/drm/sun4i/sun4i_tcon.c | 90 ++----------------------
> 14 files changed, 88 insertions(+), 397 deletions(-)
>
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c
> index 6119b5085501..4614048a4935 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c
> @@ -22,7 +22,7 @@
> #include <linux/of_graph.h>
>
> #include <drm/drmP.h>
> -#include <drm/drm_panel.h>
> +#include <drm/drm_of.h>
>
> #include "atmel_hlcdc_dc.h"
>
> @@ -152,29 +152,11 @@ static const struct drm_connector_funcs atmel_hlcdc_panel_connector_funcs = {
> .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> };
>
> -static int atmel_hlcdc_check_endpoint(struct drm_device *dev,
> - const struct of_endpoint *ep)
> -{
> - struct device_node *np;
> - void *obj;
> -
> - np = of_graph_get_remote_port_parent(ep->local_node);
> -
> - obj = of_drm_find_panel(np);
> - if (!obj)
> - obj = of_drm_find_bridge(np);
> -
> - of_node_put(np);
> -
> - return obj ? 0 : -EPROBE_DEFER;
> -}
> -
> static int atmel_hlcdc_attach_endpoint(struct drm_device *dev,
> - const struct of_endpoint *ep)
> + const struct device_node *np)
> {
> struct atmel_hlcdc_dc *dc = dev->dev_private;
> struct atmel_hlcdc_rgb_output *output;
> - struct device_node *np;
> struct drm_panel *panel;
> struct drm_bridge *bridge;
> int ret;
> @@ -195,13 +177,11 @@ static int atmel_hlcdc_attach_endpoint(struct drm_device *dev,
>
> output->encoder.possible_crtcs = 0x1;
>
> - np = of_graph_get_remote_port_parent(ep->local_node);
> -
> - ret = -EPROBE_DEFER;
> + ret = drm_of_find_panel_or_bridge(np, 0, 0, &panel, &bridge);
> + if (ret)
> + return ret;
>
> - panel = of_drm_find_panel(np);
> if (panel) {
> - of_node_put(np);
> output->connector.dpms = DRM_MODE_DPMS_OFF;
> output->connector.polled = DRM_CONNECTOR_POLL_CONNECT;
> drm_connector_helper_add(&output->connector,
> @@ -226,9 +206,6 @@ static int atmel_hlcdc_attach_endpoint(struct drm_device *dev,
> return 0;
> }
>
> - bridge = of_drm_find_bridge(np);
> - of_node_put(np);
> -
> if (bridge) {
> output->encoder.bridge = bridge;
> bridge->encoder = &output->encoder;
> @@ -245,31 +222,14 @@ static int atmel_hlcdc_attach_endpoint(struct drm_device *dev,
>
> int atmel_hlcdc_create_outputs(struct drm_device *dev)
> {
> - struct device_node *ep_np = NULL;
> - struct of_endpoint ep;
> + struct device_node *remote;
> int ret;
>
> - for_each_endpoint_of_node(dev->dev->of_node, ep_np) {
> - ret = of_graph_parse_endpoint(ep_np, &ep);
> - if (!ret)
> - ret = atmel_hlcdc_check_endpoint(dev, &ep);
> -
> - if (ret) {
> - of_node_put(ep_np);
> - return ret;
> - }
> - }
> -
> - for_each_endpoint_of_node(dev->dev->of_node, ep_np) {
> - ret = of_graph_parse_endpoint(ep_np, &ep);
> - if (!ret)
> - ret = atmel_hlcdc_attach_endpoint(dev, &ep);
> -
> - if (ret) {
> - of_node_put(ep_np);
> - return ret;
> - }
> - }
> + remote = of_graph_get_remote_node(dev->dev->of_node, 0, 0);
> + if (!remote)
> + return -ENODEV;
I know you said ports and endpoints should be statically assigned and
documented in the DT bindings doc, while I agree with the ports part,
having static endpoints numbering is not possible in some cases.
Here the port exposed by the Atmel display controller is a raw RGB (or
parallel RGB) port, and you can connect as many devices as you want to
this port. For example, on some atmel boards with have 1 bridge ans 1
panel connected to the same port (but we could have X bridges and Y
panels and it would work the same way), hence the
for_each_endpoint_of_node() loop used to connect panels and bridges to
the controller.
With your change, my use case no longer works, I can either have the
panel or the bridge, but not both.
Something like the following would solve the problem:
endpoint = 0;
while (true) {
remote = of_graph_get_remote_node(dev->dev->of_node, 0,
endpoint++);
if (!remote)
break;
ret = atmel_hlcdc_attach_endpoint(dev, remote);
if (ret)
return ret;
}
if (!endpoint)
return -ENODEV;
return 0;
If you're not happy with the 'random number of endpoints' thing, can
you suggest another approach to handle the raw RGB port case (I'm
pretty sure I'm not the only one to have this use case).
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
