On Sat, Feb 04, 2017 at 02:16:27PM +0000, Stefan Wahren wrote:
> As suggested by Eduardo Valentin this adds the thermal zone for
> the bcm2835 SoC. Since we currently don't have any cooling devices
> leave this section empty.
>
> Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
> ---
> arch/arm/boot/dts/bcm283x.dtsi | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
> index 9c7ec7e..359da9d 100644
> --- a/arch/arm/boot/dts/bcm283x.dtsi
> +++ b/arch/arm/boot/dts/bcm283x.dtsi
> @@ -19,6 +19,25 @@
> bootargs = "earlyprintk console=ttyAMA0";
> };
>
> + thermal-zones {
> + gpu_thermal: gpu-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&thermal>;
> +
> + trips {
> + cpu-crit {
> + temperature = <80000>;
> + hysteresis = <0>;
> + type = "critical";
> + };
> + };
> + cooling-maps {
> + };
> + };
> + };
> +
This is fine with me. Checking the other patches in the series.
> soc {
> compatible = "simple-bus";
> #address-cells = <1>;
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
