On Tue, Feb 07, 2017 at 08:19:31PM -0800, Eduardo Valentin wrote:
> On Sat, Feb 04, 2017 at 02:16:27PM +0000, Stefan Wahren wrote:
> > As suggested by Eduardo Valentin this adds the thermal zone for
> > the bcm2835 SoC. Since we currently don't have any cooling devices
> > leave this section empty.
> >
> > Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
> > ---
> > arch/arm/boot/dts/bcm283x.dtsi | 19 +++++++++++++++++++
> > 1 file changed, 19 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
> > index 9c7ec7e..359da9d 100644
> > --- a/arch/arm/boot/dts/bcm283x.dtsi
> > +++ b/arch/arm/boot/dts/bcm283x.dtsi
> > @@ -19,6 +19,25 @@
> > bootargs = "earlyprintk console=ttyAMA0";
> > };
> >
> > + thermal-zones {
> > + gpu_thermal: gpu-thermal {
> > + polling-delay-passive = <0>;
> > + polling-delay = <1000>;
> > +
> > + thermal-sensors = <&thermal>;
Just came to my mind, dont you need to have an id to specify with sensor
points to gpu?
> > +
> > + trips {
> > + cpu-crit {
> > + temperature = <80000>;
> > + hysteresis = <0>;
> > + type = "critical";
> > + };
> > + };
> > + cooling-maps {
> > + };
> > + };
> > + };
> > +
>
> This is fine with me. Checking the other patches in the series.
>
> > soc {
> > compatible = "simple-bus";
> > #address-cells = <1>;
> > --
> > 1.7.9.5
> >
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
