From: Alban Bedel <albeu@xxxxxxx>
The binding for the USB PHY went thru before the driver. However the
new version of the driver now use the PHY core support for reset, and
this expect the reset to be named "phy". So remove the "usb-" prefix
from the the reset names.
Signed-off-by: Alban Bedel <albeu@xxxxxxx>
---
Documentation/devicetree/bindings/phy/phy-ath79-usb.txt | 4 ++--
arch/mips/boot/dts/qca/ar9132.dtsi | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt b/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt
index cafe219..c3a29c5 100644
--- a/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt
+++ b/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt
@@ -3,7 +3,7 @@
Required properties:
- compatible: "qca,ar7100-usb-phy"
- #phys-cells: should be 0
-- reset-names: "usb-phy"[, "usb-suspend-override"]
+- reset-names: "phy"[, "suspend-override"]
- resets: references to the reset controllers
Example:
@@ -11,7 +11,7 @@ Example:
usb-phy {
compatible = "qca,ar7100-usb-phy";
- reset-names = "usb-phy", "usb-suspend-override";
+ reset-names = "phy", "suspend-override";
resets = <&rst 4>, <&rst 3>;
#phy-cells = <0>;
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
index 302f0a8..808c2bb 100644
--- a/arch/mips/boot/dts/qca/ar9132.dtsi
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -160,7 +160,7 @@
usb_phy: usb-phy {
compatible = "qca,ar7100-usb-phy";
- reset-names = "usb-phy", "usb-suspend-override";
+ reset-names = "phy", "suspend-override";
resets = <&rst 4>, <&rst 3>;
#phy-cells = <0>;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
