On Tue, Jan 24, 2017 at 11:45:32AM -0600, Rob Herring wrote:
> Node name unit-addresses should never begin with 0x or leading 0s
> regardless of whether they have a bus specific address (i.e. one with
> commas) or not. Add warnings to check for these cases.
>
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
I'd prefer to see this check split out on its own rather than folded
into unit_address_vs_reg. Strictly speaking you could have a bus
binding which does specify unit addresses starting with leading 0 or
0x, although it's pretty unlikely. Splitting this out will make it
easier to override this when we start having cases where we can really
check the unit address is correct versus the bus binding.
> ---
> checks.c | 10 ++++++++++
> tests/run_tests.sh | 2 ++
> tests/unit-addr-leading-0s.dts | 10 ++++++++++
> tests/unit-addr-leading-0x.dts | 10 ++++++++++
> 4 files changed, 32 insertions(+)
> create mode 100644 tests/unit-addr-leading-0s.dts
> create mode 100644 tests/unit-addr-leading-0x.dts
>
> diff --git a/checks.c b/checks.c
> index 0c78d69316bc..8e310d69ca3d 100644
> --- a/checks.c
> +++ b/checks.c
> @@ -288,6 +288,16 @@ static void check_unit_address_vs_reg(struct check *c, struct dt_info *dti,
> if (!unitname[0])
> FAIL(c, "Node %s has a reg or ranges property, but no unit name",
> node->fullpath);
> +
> + if (!strncmp(unitname, "0x", 2)) {
> + FAIL(c, "Node %s unit name should not have leading \"0x\"",
> + node->fullpath);
> + /* skip over 0x for next test */
> + unitname += 2;
> + }
> + if (unitname[0] == '0' && isxdigit(unitname[1]))
> + FAIL(c, "Node %s unit name should not have leading 0s",
> + node->fullpath);
> } else {
> if (unitname[0])
> FAIL(c, "Node %s has a unit name, but no reg property",
> diff --git a/tests/run_tests.sh b/tests/run_tests.sh
> index 157dbaea7600..2c06666a9e23 100755
> --- a/tests/run_tests.sh
> +++ b/tests/run_tests.sh
> @@ -539,6 +539,8 @@ dtc_tests () {
> check_tests obsolete-chosen-interrupt-controller.dts obsolete_chosen_interrupt_controller
> check_tests reg-without-unit-addr.dts unit_address_vs_reg
> check_tests unit-addr-without-reg.dts unit_address_vs_reg
> + check_tests unit-addr-leading-0x.dts unit_address_vs_reg
> + check_tests unit-addr-leading-0s.dts unit_address_vs_reg
> run_sh_test dtc-checkfails.sh node_name_chars -- -I dtb -O dtb bad_node_char.dtb
> run_sh_test dtc-checkfails.sh node_name_format -- -I dtb -O dtb bad_node_format.dtb
> run_sh_test dtc-checkfails.sh prop_name_chars -- -I dtb -O dtb bad_prop_char.dtb
> diff --git a/tests/unit-addr-leading-0s.dts b/tests/unit-addr-leading-0s.dts
> new file mode 100644
> index 000000000000..7c8e2cebbc84
> --- /dev/null
> +++ b/tests/unit-addr-leading-0s.dts
> @@ -0,0 +1,10 @@
> +/dts-v1/;
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + node@001 {
> + reg = <1 0>;
> + };
> +};
> diff --git a/tests/unit-addr-leading-0x.dts b/tests/unit-addr-leading-0x.dts
> new file mode 100644
> index 000000000000..7ed7254e8dc2
> --- /dev/null
> +++ b/tests/unit-addr-leading-0x.dts
> @@ -0,0 +1,10 @@
> +/dts-v1/;
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + node@0x1 {
> + reg = <1 0>;
> + };
> +};
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
Attachment:
signature.asc
Description: PGP signature
