Hi Chris,
On ven., janv. 27 2017, Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> wrote:
> Compared to the armada-xp the 98DX3336 uses different registers to set
> the boot address for the secondary CPU so a new enable-method is needed.
> This will only work if the machine definition doesn't define an overall
> smp_ops because there is not currently a way of overriding this from the
> device tree if it is set in the machine definition.
>
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>
> Notes:
> Changes in v2:
> - Document new enable-method value
> - Correct some references from 98DX4521 to 98DX3236
> Changes in v3:
> - Simplify mv98dx3236_resume_init by using of_io_request_and_map()
> Changes in v4:
> - integrate changes into platsmp.c instead of new init call
> - avoid duplicated code.
> - fix error return
> - Collect ack from Rob
> Changes in v5:
> - Remove useless casts (thanks to Stephen Boyd)
>
> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
> .../bindings/arm/marvell/98dx3236-resume-ctrl.txt | 16 ++++
> arch/arm/mach-mvebu/platsmp.c | 86 ++++++++++++++++++++++
> 3 files changed, 103 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
> index a1bcfeed5f24..3c2fd72d0bf9 100644
> --- a/Documentation/devicetree/bindings/arm/cpus.txt
> +++ b/Documentation/devicetree/bindings/arm/cpus.txt
> @@ -202,6 +202,7 @@ nodes to be present and contain the properties described below.
> "marvell,armada-380-smp"
> "marvell,armada-390-smp"
> "marvell,armada-xp-smp"
> + "marvell,98dx3236-smp"
> "mediatek,mt6589-smp"
> "mediatek,mt81xx-tz-smp"
> "qcom,gcc-msm8660"
> diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
> new file mode 100644
> index 000000000000..26eb9d3aa630
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
> @@ -0,0 +1,16 @@
> +Resume Control
> +--------------
> +Available on Marvell SOCs: 98DX3336 and 98DX4251
> +
> +Required properties:
> +
> +- compatible: must be "marvell,98dx3336-resume-ctrl"
> +
> +- reg: Should contain resume control registers location and length
> +
> +Example:
> +
> +resume@20980 {
> + compatible = "marvell,98dx3336-resume-ctrl";
> + reg = <0x20980 0x10>;
> +};
> diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
> index 46c742d3bd41..a5b464497e1a 100644
> --- a/arch/arm/mach-mvebu/platsmp.c
> +++ b/arch/arm/mach-mvebu/platsmp.c
> @@ -184,3 +184,89 @@ const struct smp_operations armada_xp_smp_ops __initconst = {
>
> CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp",
> &armada_xp_smp_ops);
> +
> +struct resume_controller {
> + u32 resume_control;
> + u32 resume_boot_addr;
> +};
> +
> +static const struct resume_controller mv98dx3336_resume_controller = {
> + .resume_control = 0x08,
> + .resume_boot_addr = 0x04,
> +};
> +
> +static const struct of_device_id of_mv98dx3236_resume_table[] = {
> + {
> + .compatible = "marvell,98dx3336-resume-ctrl",
> + .data = &mv98dx3336_resume_controller,
> + },
> + { /* end of list */ },
> +};
Do you expect to have other SoC which use the same logical but with
register at a different place?
Else you can just remove the resume_controller struct and use the address
(using define) directly in the mv98dx3236_resume_set_cpu_boot_addr
function.
> +
> +static int mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
> +{
> + const struct of_device_id *match;
> + struct device_node *np;
> + void __iomem *base;
> + const struct resume_controller *rc;
> +
> + WARN_ON(hw_cpu != 1);
> +
> + np = of_find_matching_node_and_match(NULL, of_mv98dx3236_resume_table,
> + &match);
> + if (!np)
> + return -ENODEV;
> +
> + base = of_io_request_and_map(np, 0, of_node_full_name(np));
> + rc = match->data;
> + of_node_put(np);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + writel(0, base + rc->resume_control);
> + writel(virt_to_phys(boot_addr), base + rc->resume_boot_addr);
> +
you should use iounmap() on base here, to free it.
Gregory
> + return 0;
> +}
> +
> +static int mv98dx3236_boot_secondary(unsigned int cpu, struct task_struct *idle)
> +{
> + int ret, hw_cpu;
> +
> + hw_cpu = cpu_logical_map(cpu);
> + set_secondary_cpu_clock(hw_cpu);
> + mv98dx3236_resume_set_cpu_boot_addr(hw_cpu,
> + armada_xp_secondary_startup);
> +
> + /*
> + * This is needed to wake up CPUs in the offline state after
> + * using CPU hotplug.
> + */
> + arch_send_wakeup_ipi_mask(cpumask_of(cpu));
> +
> + /*
> + * This is needed to take secondary CPUs out of reset on the
> + * initial boot.
> + */
> + ret = mvebu_cpu_reset_deassert(hw_cpu);
> + if (ret) {
> + pr_warn("unable to boot CPU: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct smp_operations mv98dx3236_smp_ops __initconst = {
> + .smp_init_cpus = armada_xp_smp_init_cpus,
> + .smp_prepare_cpus = armada_xp_smp_prepare_cpus,
> + .smp_boot_secondary = mv98dx3236_boot_secondary,
> + .smp_secondary_init = armada_xp_secondary_init,
> +#ifdef CONFIG_HOTPLUG_CPU
> + .cpu_die = armada_xp_cpu_die,
> + .cpu_kill = armada_xp_cpu_kill,
> +#endif
> +};
> +
> +CPU_METHOD_OF_DECLARE(mv98dx3236_smp, "marvell,98dx3236-smp",
> + &mv98dx3236_smp_ops);
> --
> 2.11.0.24.ge6920cf
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
