Various muxes can aggregate multiple interrupts from each i2c bus.
All of the muxes with interrupt support combine the active low irq lines
using an internal 'and' function and generate a combined active low
output. The muxes do provide the ability to read a control register to
determine which irq is active. By making the mux an irq controller isr
latenct can potentially be reduced by reading the status register and
then only calling the registered isr on that bus segment.
Changes from v5:
- p3 Added Peter's Ack.
- Drop p4/5
Changes from v4:
- p4: Change definition of irq_mask_enable to an array.
- p4: Removed acks due to change requested by Peter
- p5: Parse array of enables. Currently only supports 1 chip
But dt specification will allow expansion to handle
multple irq consume chips to be registered on a bus segment
- p5: Fix up logic related to enabling and disable irq's.
Use a flag to indicate when irq has been enabled.
Changes from v3:
- p3: Add spin lock to irq mask / unmask.
- p4: Add Rob's ack.
Changes from v2:
- p1: Added Acked-by
- p5: fixup 2 typos
Changes from v1:
- Update for new ACPI table
- Fix typo in documentation
- Fix typo in function names
- Fix typo in irq name
- Added spaces around '+' / '='
- Change goto label names
- Change property name from i2c-mux-irq-mask-en to nxp,irq-mask-enable
- Change variable name irq_mask_en to irq_mask_enable
- Add commentt about irq_mask_enable
- Added Acked-By's
Phil Reid (3):
i2c: mux: pca954x: Add missing pca9542 definition to chip_desc
dt: bindings: i2c-mux-pca954x: Add documentation for interrupt
controller
i2c: mux: pca954x: Add interrupt controller support
.../devicetree/bindings/i2c/i2c-mux-pca954x.txt | 14 +-
drivers/i2c/muxes/i2c-mux-pca954x.c | 150 ++++++++++++++++++++-
2 files changed, 159 insertions(+), 5 deletions(-)
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
