On 01/23/2017 03:13 AM, Philipp Zabel wrote:
Hi Steve,
On Sun, 2017-01-22 at 18:31 -0800, Steve Longerbeam wrote:
On 01/16/2017 05:47 AM, Philipp Zabel wrote:
On Sat, 2017-01-14 at 14:46 -0800, Steve Longerbeam wrote:
[...]
+Unprocessed Video Capture:
+--------------------------
+
+Send frames directly from sensor to camera interface, with no
+conversions:
+
+-> ipu_smfc -> camif
I'd call this capture interface, this is not just for cameras. Or maybe
idmac if you want to mirror hardware names?
Camif is so named because it is the V4L2 user interface for video
capture. I suppose it could be named "capif", but that doesn't role
off the tongue quite as well.
Agreed, capif sounds weird. I find camif a bit confusing though, because
Samsung S3C has a camera interface that is actually called "CAMIF".
how about simply "capture" ?
That sounds good to me.
done.
This should really be handled by v4l2_pipeline_pm_use.
I thought about this earlier, but v4l2_pipeline_pm_use() seems to be
doing some other stuff that bothered me, at least that's what I remember.
I will revisit this.
I have used it with a tc358743 -> mipi-csi2 pipeline, it didn't cause
any problems. It would be better to reuse and, if necessary, fix the
existing infrastructure where available.
I tried this API, by switching to v4l2_pipeline_pm_use() in camif
open/release,
and switched to v4l2_pipeline_link_notify() instead of
imx_media_link_notify()
in the media driver's media_device_ops.
This API assumes the video device has an open file handle while the media
links are being established. This doesn't work for me, I want to be able to
establish the links using 'media-ctl -l', and that won't work unless
there is an
open file handle on the video capture device node.
Also, I looked into calling v4l2_pipeline_pm_use() during
imx_media_link_notify(),
instead of imx_media_pipeline_set_power(). Again there are problems with
that.
First, v4l2_pipeline_pm_use() acquires the graph mutex, so it can't be
called inside
link_notify which already acquires that lock. The header for this
function also
clearly states it should only be called in open/release.
So why not call it in open/release then?
er, see above (?)
Second, ignoring the above locking issue for a moment,
v4l2_pipeline_pm_use()
will call s_power on the sensor _first_, then the mipi csi-2 s_power,
when executing
media-ctl -l '"ov5640 1-003c":0 -> "imx6-mipi-csi2":0[1]'. Which is the
wrong order.
In my version which enforces the correct power on order, the mipi csi-2
s_power
is called first in that link setup, followed by the sensor.
I don't understand why you want to power up subdevs as soon as the links
are established.
Because that is the precedence, all other media drivers do pipeline
power on/off at link_notify. And v4l2_pipeline_link_notify() was written
as a link_notify method.
Shouldn't that rather be done for all subdevices in the
pipeline when the corresponding capture device is opened?
that won't work. There's no guarantee the links will be established
at capture device open time.
It seems to me that powering up the pipeline should be the last step
before userspace actually starts the capture.
Well, I'm ok with moving pipeline power on/off to start/stop streaming.
I would actually prefer to do it then, I only chose at link_notify because
of precedence. I'll look into it.
Steve
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
