This series adds the reset GPIOs for the (external) ethernet PHYs on all GXBB boards. Additionally it provides a ethernet PHY node which can be used to specify PHY-specific properties (this may be required if more boards require the "eee-broken-1000t" for the RTL8211F ethernet PHY). To make all board .dts consistent I chose to add the PHY node also for boards which don't have a RTL8211F PHY. Patch #7 from this series also removes ethernet support for the P200 board because it was broken anyways and nobody seems to have a board available for testing. This was the outcome of the discussion from [0] Patch #8 was taken from (older versions of) my other series (see [1]): "[PATCH net-next v3 0/2] stmmac: dwmac-meson8b: configurable RGMII TX delay". The binding changes for amlogic,tx-delay-ns were ACK'ed already. Changes since v2: - fixed patch #2 to really update the P200 board (as it's the P200 which actually uses a Micrel KSZ9031 RGMII PHY). Thanks to Neil Armstrong for spotting this huge mistake! - instead of dropping ethernet support for P201 we simply re-configure it to RMII mode (replaces patch #7) without a MDIO node (which keeps PHY auto-scanning enabled). This got Neil Armstrong's ACK off-list already Changes since v1: - do not move the MDIO bus to meson-gx as this disables PHY auto-scanning in the stmmac driver (this drops patch #1 from v1) - add the ethernet PHY reset GPIO for nexbox a95x which was forgotten in v1 - add the ethernet PHY reset GPIO for boards which were added since v1 (wetek hub and wetek play2) - rebased to apply against the current v4.11/dt64 branch - new in v2 (patch #7): disabled ethernet support for the P200 board (see the commit description for more information). this patch is optional - new in v2 (patch #9): removed the phy-mode property from meson-gx (see the commit description for more information). this patch is optional [0] http://lists.infradead.org/pipermail/linux-amlogic/2017-January/002053.html [1] http://lists.infradead.org/pipermail/linux-amlogic/2016-December/001834.html Martin Blumenstingl (9): ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset GPIO ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset GPIO ARM64: dts: meson-gxbb-p201: fix ethernet support ARM64: dts: amlogic: add the ethernet TX delay configuration ARM64: dts: meson-gx: remove the phy-mode property from meson-gx arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 1 - .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 17 ++++++++++++++ .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 7 ++++++ arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 26 ++++++++++++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts | 11 +++++++++ arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 6 ----- .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 20 +++++++++++++++++ .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 26 ++++++++++++++++++++++ .../boot/dts/amlogic/meson-gxbb-wetek-play2.dts | 26 ++++++++++++++++++++++ .../boot/dts/amlogic/meson-gxl-s905d-p230.dts | 2 ++ .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 2 ++ arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts | 2 ++ 12 files changed, 139 insertions(+), 7 deletions(-) -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
