Hi,
On Wed, Jan 18, 2017 at 3:32 PM, Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx> wrote:
> From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
>
> Adding fixed voltage regulators for Vbus and Vbus-boost required
> by USB 3.0 DRD controller on Exynos7-espresso board.
>
> Signed-off-by: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
> Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
> Reviewed-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
> ---
Reviewed-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
> arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 45 +++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> index 1b2db9f0..e4705fd 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> @@ -13,6 +13,7 @@
> #include "exynos7.dtsi"
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/clock/samsung,s2mps11.h>
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> model = "Samsung Exynos7 Espresso board based on EXYNOS7";
> @@ -32,6 +33,29 @@
> device_type = "memory";
> reg = <0x0 0x40000000 0x0 0xC0000000>;
> };
> +
> + usb30_vbus_reg: regulator-usb30 {
> + compatible = "regulator-fixed";
> + regulator-name = "VBUS_5V";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gph1 1 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb30_vbus_en>;
> + enable-active-high;
> + };
> +
> + usb3drd_boost_5v: regulator-usb3drd-boost {
> + compatible = "regulator-fixed";
> + regulator-name = "VUSB_VBUS_5V";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb3drd_boost_en>;
> + enable-active-high;
> + };
> +
> };
>
> &fin_pll {
> @@ -365,3 +389,24 @@
> vqmmc-supply = <&ldo2_reg>;
> disable-wp;
> };
> +
> +&usbdrd_phy {
> + vbus-supply = <&usb30_vbus_reg>;
> + vbus-boost-supply = <&usb3drd_boost_5v>;
> +};
> +
> +&pinctrl_bus1 {
> + usb30_vbus_en: usb30-vbus-en {
> + samsung,pins = "gph1-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> + };
> +
> + usb3drd_boost_en: usb3drd-boost-en {
> + samsung,pins = "gpf4-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> + };
> +};
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Regards,
Alim
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
