This patch series adds USB 3.0 DRD device node for Exynos7 and required Vbus and Vbus-boost support for espresso dev boards. These patches are part of patch series [1] earlier submitted by Vivek While other patches in these series got merged, DTS related change were left. I have prepared and tested these patches on top of krzk/for-next and my patch series "Use macros for pinctrl configuration on Exynos7" [2]. [1]: https://lkml.org/lkml/2014/11/21/247 [2]: https://www.spinics.net/lists/arm-kernel/msg555333.html Changes since v1: - Updated S-o-B order and Authorship of patches. - Added Javier's Reviewed-by. - Replaced GPIO polarity values with appropriate macros. Changes since v2: - Changed order of S-o-B and R-o-B lines - Removed address node from parent usb node - Replaced pinctrl configuration values with macros Vivek Gautam (2): arm64: dts: exynos: Add USB 3.0 controller node for Exynos7 arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 45 +++++++++++++++++++++++++ arch/arm64/boot/dts/exynos/exynos7.dtsi | 34 +++++++++++++++++++ 2 files changed, 79 insertions(+) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
