The DA8xx has a CPPI 4.1 DMA controller. This is add the glue layer required to make it work on DA8xx. Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx> --- drivers/dma/cppi41.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c index 0bc4f1a..aab1e5a 100644 --- a/drivers/dma/cppi41.c +++ b/drivers/dma/cppi41.c @@ -221,6 +221,20 @@ static const struct chan_queues am335x_usb_queues_rx[] = { [29] = { .submit = 30, .complete = 155}, }; +static const struct chan_queues da8xx_usb_queues_tx[] = { + [0] = { .submit = 16, .complete = 24}, + [1] = { .submit = 18, .complete = 24}, + [2] = { .submit = 20, .complete = 24}, + [3] = { .submit = 22, .complete = 24}, +}; + +static const struct chan_queues da8xx_usb_queues_rx[] = { + [0] = { .submit = 1, .complete = 26}, + [1] = { .submit = 3, .complete = 26}, + [2] = { .submit = 5, .complete = 26}, + [3] = { .submit = 7, .complete = 26}, +}; + struct cppi_glue_infos { irqreturn_t (*isr)(int irq, void *data); const struct chan_queues *queues_rx; @@ -962,8 +976,18 @@ static const struct cppi_glue_infos am335x_usb_infos = { .qmgr_num_pend = 5, }; +static const struct cppi_glue_infos da8xx_usb_infos = { + .isr = cppi41_irq, + .queues_rx = da8xx_usb_queues_rx, + .queues_tx = da8xx_usb_queues_tx, + .td_queue = { .submit = 31, .complete = 0 }, + .first_completion_queue = 24, + .qmgr_num_pend = 2, +}; + static const struct of_device_id cppi41_dma_ids[] = { { .compatible = "ti,am3359-cppi41", .data = &am335x_usb_infos}, + { .compatible = "ti,da8xx-cppi41", .data = &da8xx_usb_infos}, {}, }; MODULE_DEVICE_TABLE(of, cppi41_dma_ids); -- 2.10.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html