Signed-off-by: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/usb/dwc3-st.txt | 4 ++-- Documentation/devicetree/bindings/usb/ehci-st.txt | 2 +- Documentation/devicetree/bindings/usb/mt8173-mtu3.txt | 2 +- Documentation/devicetree/bindings/usb/mt8173-xhci.txt | 4 ++-- Documentation/devicetree/bindings/usb/qcom,dwc3.txt | 2 +- 5 files changed, 7 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt index 01c71b1..50dee3b 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-st.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt @@ -20,10 +20,10 @@ See: Documentation/devicetree/bindings/reset/reset.txt with 'reg' property - pinctl-names : A pinctrl state named "default" must be defined -See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt +See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - pinctrl-0 : Pin control group -See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt +See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - ranges : allows valid 1:1 translation between child's address space and parent's address space diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt index fb45fa5..410d922 100644 --- a/Documentation/devicetree/bindings/usb/ehci-st.txt +++ b/Documentation/devicetree/bindings/usb/ehci-st.txt @@ -7,7 +7,7 @@ Required properties: - interrupts : one EHCI interrupt should be described here - pinctrl-names : a pinctrl state named "default" must be defined - pinctrl-0 : phandle referencing pin configuration of the USB controller -See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt +See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - clocks : phandle list of usb clocks - clock-names : should be "ic" for interconnect clock and "clk48" See: Documentation/devicetree/bindings/clock/clock-bindings.txt diff --git a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt b/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt index e049d19..718386a 100644 --- a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt @@ -30,7 +30,7 @@ Optional properties: "id_float" and "id_ground" are optinal which depends on "mediatek,enable-manual-drd" - pinctrl-0 : pin control group - See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - maximum-speed : valid arguments are "super-speed", "high-speed" and "full-speed"; refer to usb/generic.txt diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt index 2a930bd..7ea3971 100644 --- a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt +++ b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt @@ -37,7 +37,7 @@ Optional properties: - usb3-lpm-capable : supports USB3.0 LPM - pinctrl-names : a pinctrl state named "default" must be defined - pinctrl-0 : pin control group - See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt Example: usb30: usb@11270000 { @@ -67,7 +67,7 @@ usb30: usb@11270000 { In the case, xhci is added as subnode to mtu3. An example and the DT binding details of mtu3 can be found in: -Documentation/devicetree/bindings/usb/mtu3.txt +Documentation/devicetree/bindings/usb/mt8173-mtu3.txt Required properties: - compatible : should contain "mediatek,mt8173-xhci" diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt index 39acb08..73cc096 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt @@ -18,7 +18,7 @@ A child node must exist to represent the core DWC3 IP block. The name of the node is not important. The content of the node is defined in dwc3.txt. Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/qcom,dwc3-usb-phy.txt +Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt Example device nodes: -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html