On 01/13/2017 03:57 AM, Philipp Zabel wrote:
Am Freitag, den 06.01.2017, 18:11 -0800 schrieb Steve Longerbeam:
Add to the MIPI CSI2 receiver node: compatible string, interrupt sources,
clocks.
Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
---
arch/arm/boot/dts/imx6qdl.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 53e6e63..42926e9 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -1125,7 +1125,14 @@
};
mipi_csi: mipi@021dc000 {
+ compatible = "fsl,imx6-mipi-csi2";
reg = <0x021dc000 0x4000>;
+ interrupts = <0 100 0x04>, <0 101 0x04>;
+ clocks = <&clks IMX6QDL_CLK_HSI_TX>,
+ <&clks IMX6QDL_CLK_VIDEO_27M>,
+ <&clks IMX6QDL_CLK_EIM_SEL>;
I think the latter should be EIM_PODF
done.
+ clock-names = "dphy", "cfg", "pix";
and I'm not sure dphy is the right name for this one. Is that the pll
ref input?
I believe this naming came from FSL's mipi csi-2 driver. It is the "hsi_tx"
clock (presumably for the MIPI HSI controller) whose parents are selected
by the CDCDR register as PLL3_120M or PLL2_PFD2. I have no clue whether
this is indeed also used as the clock for the MIPI CSI-2 D-PHY, but
according
to FSL naming convention it might be.
Steve
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
