Am Freitag, den 06.01.2017, 18:11 -0800 schrieb Steve Longerbeam:
> Add to the MIPI CSI2 receiver node: compatible string, interrupt sources,
> clocks.
>
> Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/imx6qdl.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index 53e6e63..42926e9 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -1125,7 +1125,14 @@
> };
>
> mipi_csi: mipi@021dc000 {
> + compatible = "fsl,imx6-mipi-csi2";
> reg = <0x021dc000 0x4000>;
> + interrupts = <0 100 0x04>, <0 101 0x04>;
> + clocks = <&clks IMX6QDL_CLK_HSI_TX>,
> + <&clks IMX6QDL_CLK_VIDEO_27M>,
> + <&clks IMX6QDL_CLK_EIM_SEL>;
I think the latter should be EIM_PODF
> + clock-names = "dphy", "cfg", "pix";
and I'm not sure dphy is the right name for this one. Is that the pll
ref input?
> + status = "disabled";
> };
>
> mipi_dsi: mipi@021e0000 {
regards
Philipp
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
