Fix the SD card detect signal, which was missing the polarity specification, and the pull-up necessary for proper signalling. Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi index 11b63f6f2b89..734487edf200 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi @@ -393,7 +393,7 @@ pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux { fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x13071 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071 MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 >; @@ -520,7 +520,7 @@ &pinctrl_hummingboard2_usdhc2_200mhz >; mmc-pwrseq = <&usdhc2_pwrseq>; - cd-gpios = <&gpio1 4 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html