On Thu, Jan 12, 2017 at 9:22 PM, Matt Ranostay <matt@ranostay.consulting> wrote: > Allow power sequencing for the Marvell SD8787 Wifi/BT chip. > This can be abstracted to other chipsets if needed in the future. Er crap seems how the main patch file got dropped out. Resubmitting in a minute... sorry! > > Cc: Tony Lindgren <tony@xxxxxxxxxxx> > Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx> > Signed-off-by: Matt Ranostay <matt@ranostay.consulting> > --- > drivers/mmc/core/Kconfig | 10 ++++++++++ > drivers/mmc/core/Makefile | 1 + > 2 files changed, 11 insertions(+) > > diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig > index cdfa8520a4b1..fc1ecdaaa9ca 100644 > --- a/drivers/mmc/core/Kconfig > +++ b/drivers/mmc/core/Kconfig > @@ -12,6 +12,16 @@ config PWRSEQ_EMMC > This driver can also be built as a module. If so, the module > will be called pwrseq_emmc. > > +config PWRSEQ_SD8787 > + tristate "HW reset support for SD8787 BT + Wifi module" > + depends on OF && (MWIFIEX || BT_MRVL_SDIO) > + help > + This selects hardware reset support for the SD8787 BT + Wifi > + module. By default this option is set to n. > + > + This driver can also be built as a module. If so, the module > + will be called pwrseq_sd8787. > + > config PWRSEQ_SIMPLE > tristate "Simple HW reset support for MMC" > default y > diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile > index b2a257dc644f..0f81464fa824 100644 > --- a/drivers/mmc/core/Makefile > +++ b/drivers/mmc/core/Makefile > @@ -10,6 +10,7 @@ mmc_core-y := core.o bus.o host.o \ > quirks.o slot-gpio.o > mmc_core-$(CONFIG_OF) += pwrseq.o > obj-$(CONFIG_PWRSEQ_SIMPLE) += pwrseq_simple.o > +obj-$(CONFIG_PWRSEQ_SD8787) += pwrseq_sd8787.o > obj-$(CONFIG_PWRSEQ_EMMC) += pwrseq_emmc.o > mmc_core-$(CONFIG_DEBUG_FS) += debugfs.o > obj-$(CONFIG_MMC_BLOCK) += mmc_block.o > -- > 2.10.2 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
