Tomasz,
Thanks for reviewing. I'll fix the patch description and style problems.
Regards,
Alex
On Sun, Dec 15, 2013 at 2:57 AM, Tomasz Figa <tomasz.figa@xxxxxxxxx> wrote:
> Hi Alex,
>
> On Friday 15 of November 2013 21:09:29 Alex Ling wrote:
>> Add a minimal board dts file for EXYNOS4412 based FriendlyARM's
>> TINY4412 board. This patch including adds the node to support
>> peripherals like UART, SD card on SDMMC2 port, and this patch
>> adds GPIO connected LEDS and configure its properties like
>> following:
>> LED1: use 'heartbeat' trigger, blinking while the board is running.
>> LED4: use 'mmc0' trigger, on when mmc0 is accessing.
>> LED2 and LED3 can be controlled from userspace.
>
> Well, all the LEDs can be controlled from userspace. The default trigger
> is just the initial setting, which can be changed later by userspace.
> It's just a general comment, not an issue with the patch, though.
>
> Anyway, you don't need such detailed patch description, as you can see
> most of the things directly from the code. In case of this patch, just the
> list of supported peripherals is fine, without going into minor details,
> such as LED triggers.
>
> Also, please see my comments inline.
>
> [snip]
>> diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
>> new file mode 100644
>> index 0000000..78ace14
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
> [snip]
>> + leds {
>> + compatible = "gpio-leds";
>
> style: A blank line should be separating properties from nodes.
>
>> + led1 {
>> + label = "led1:heart";
>
> Are the labels for this and the LEDs below related to the hardware?
> I mean, the label should preferrably come from the board documentation,
> or a label on the PCB next to the LED. Also they shouldn't represent
> any particular use case, so you should remove the ":heart" suffix.
>
>> + gpios = <&gpm4 0 1>;
>> + default-state = "off";
>> + linux,default-trigger = "heartbeat";
>> + };
>
> style: Subnodes should be separated with blank lines.
>
> Otherwise the patch looks fine.
>
> Best regards,
> Tomasz
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
