SDIO controllers found on Marvell Kirkwood 6281/6282 SoCs require pins to be muxed by pinctrl. As there is only one sane pinctrl setting for this, provide default pinctrl properties to the controller nodes. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> --- I am not sending this two patches to each DT maintainer, as it is a Kirkwood only thing, added the dt list for completeness. Cc: Jason Cooper <jason@xxxxxxxxxxxxxx> Cc: Andrew Lunn <andrew@xxxxxxx> Cc: Russell King <linux@xxxxxxxxxxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx --- arch/arm/boot/dts/kirkwood-6281.dtsi | 2 ++ arch/arm/boot/dts/kirkwood-6282.dtsi | 2 ++ 2 files changed, 4 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index 650ef30..e4e1968 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -97,6 +97,8 @@ reg = <0x90000 0x200>; interrupts = <28>; clocks = <&gate_clk 4>; + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; bus-width = <4>; cap-sdio-irq; cap-sd-highspeed; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 3933a33..f010c21 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -125,6 +125,8 @@ reg = <0x90000 0x200>; interrupts = <28>; clocks = <&gate_clk 4>; + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; bus-width = <4>; cap-sdio-irq; cap-sd-highspeed; -- 1.7.2.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html