On Tue, Jan 03, 2017 at 11:25:34PM +0800, Icenowy Zheng wrote: > Lichee Pi Zero features a USB OTG port. > > Add support for it. > > Note: in order to use the Host mode, the board must be powered via the > +5V and GND pins. > > Signed-off-by: Icenowy Zheng <icenowy@xxxxxxxx> > --- > arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts > index 0099affc6ce3..3d9168cbaeca 100644 > --- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts > +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts > @@ -71,3 +71,13 @@ > pinctrl-names = "default"; > status = "okay"; > }; > + > +&usb_otg { > + dr_mode = "otg"; Why not set this default mode in dtsi instead? Regards, -Bin. > + status = "okay"; > +}; > + > +&usbphy { > + usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > -- > 2.11.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html