On Tuesday 10 January 2017 03:08 PM, Alexandre Bailon wrote:
> On 01/09/2017 07:08 PM, Grygorii Strashko wrote:
>>
>>
>> On 01/09/2017 10:06 AM, Alexandre Bailon wrote:
>>> The da8xx has a cppi41 dma controller.
>>> This is add the glue layer required to make it work on da8xx,
>>> as well some changes in driver (e.g to manage clock).
>>>
>>> Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
>>> ---
>>> drivers/dma/cppi41.c | 95 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 95 insertions(+)
>>>
>>> diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c
>>> index 939398e..4318e53 100644
>>> --- a/drivers/dma/cppi41.c
>>> +++ b/drivers/dma/cppi41.c
>>> @@ -1,3 +1,4 @@
>>> +#include <linux/clk.h>
>>> #include <linux/delay.h>
>>> #include <linux/dmaengine.h>
>>> #include <linux/dma-mapping.h>
>>> @@ -86,10 +87,19 @@
>>>
>>> #define USBSS_IRQ_PD_COMP (1 << 2)
>>>
>>> +/* USB DA8XX */
>>> +#define DA8XX_INTR_SRC_MASKED 0x38
>>> +#define DA8XX_END_OF_INTR 0x3c
>>> +
>>> +#define DA8XX_QMGR_PENDING_MASK (0xf << 24)
>>> +
>>> +
>>> +
>>> /* Packet Descriptor */
>>> #define PD2_ZERO_LENGTH (1 << 19)
>>>
>>> #define AM335X_CPPI41 0
>>> +#define DA8XX_CPPI41 1
>>>
>>> struct cppi41_channel {
>>> struct dma_chan chan;
>>> @@ -158,6 +168,9 @@ struct cppi41_dd {
>>>
>>> /* context for suspend/resume */
>>> unsigned int dma_tdfdq;
>>> +
>>> + /* da8xx clock */
>>> + struct clk *clk;
>>> };
>>>
>>> static struct chan_queues am335x_usb_queues_tx[] = {
>>> @@ -232,6 +245,20 @@ static const struct chan_queues am335x_usb_queues_rx[] = {
>>> [29] = { .submit = 30, .complete = 155},
>>> };
>>>
>>> +static const struct chan_queues da8xx_usb_queues_tx[] = {
>>> + [0] = { .submit = 16, .complete = 24},
>>> + [1] = { .submit = 18, .complete = 24},
>>> + [2] = { .submit = 20, .complete = 24},
>>> + [3] = { .submit = 22, .complete = 24},
>>> +};
>>> +
>>> +static const struct chan_queues da8xx_usb_queues_rx[] = {
>>> + [0] = { .submit = 1, .complete = 26},
>>> + [1] = { .submit = 3, .complete = 26},
>>> + [2] = { .submit = 5, .complete = 26},
>>> + [3] = { .submit = 7, .complete = 26},
>>> +};
>>> +
>>> struct cppi_glue_infos {
>>> irqreturn_t (*isr)(int irq, void *data);
>>> const struct chan_queues *queues_rx;
>>> @@ -366,6 +393,26 @@ static irqreturn_t am335x_cppi41_irq(int irq, void *data)
>>> return cppi41_irq(cdd);
>>> }
>>>
>>> +static irqreturn_t da8xx_cppi41_irq(int irq, void *data)
>>> +{
>>> + struct cppi41_dd *cdd = data;
>>> + u32 status;
>>> + u32 usbss_status;
>>> +
>>> + status = cppi_readl(cdd->qmgr_mem + QMGR_PEND(0));
>>> + if (status & DA8XX_QMGR_PENDING_MASK)
>>> + cppi41_irq(cdd);
>>> + else
>>> + return IRQ_NONE;
>>> +
>>> + /* Re-assert IRQ if there no usb core interrupts pending */
>>> + usbss_status = cppi_readl(cdd->usbss_mem + DA8XX_INTR_SRC_MASKED);
>>> + if (!usbss_status)
>>> + cppi_writel(0, cdd->usbss_mem + DA8XX_END_OF_INTR);
>>> +
>>> + return IRQ_HANDLED;
>>> +}
>>> +
>>> static dma_cookie_t cppi41_tx_submit(struct dma_async_tx_descriptor *tx)
>>> {
>>> dma_cookie_t cookie;
>>> @@ -972,8 +1019,19 @@ static const struct cppi_glue_infos am335x_usb_infos = {
>>> .platform = AM335X_CPPI41,
>>> };
>>>
>>> +static const struct cppi_glue_infos da8xx_usb_infos = {
>>> + .isr = da8xx_cppi41_irq,
>>> + .queues_rx = da8xx_usb_queues_rx,
>>> + .queues_tx = da8xx_usb_queues_tx,
>>> + .td_queue = { .submit = 31, .complete = 0 },
>>> + .first_completion_queue = 24,
>>> + .qmgr_num_pend = 2,
>>> + .platform = DA8XX_CPPI41,
>>> +};
>>> +
>>> static const struct of_device_id cppi41_dma_ids[] = {
>>> { .compatible = "ti,am3359-cppi41", .data = &am335x_usb_infos},
>>> + { .compatible = "ti,da8xx-cppi41", .data = &da8xx_usb_infos},
>>> {},
>>> };
>>> MODULE_DEVICE_TABLE(of, cppi41_dma_ids);
>>> @@ -995,6 +1053,13 @@ static int is_am335x_cppi41(struct device *dev)
>>> return cdd->platform == AM335X_CPPI41;
>>> }
>>>
>>> +static int is_da8xx_cppi41(struct device *dev)
>>> +{
>>> + struct cppi41_dd *cdd = dev_get_drvdata(dev);
>>> +
>>> + return cdd->platform == DA8XX_CPPI41;
>>> +}
>>> +
>>> #define CPPI41_DMA_BUSWIDTHS (BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
>>> BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
>>> BIT(DMA_SLAVE_BUSWIDTH_3_BYTES) | \
>>> @@ -1058,6 +1123,21 @@ static int cppi41_dma_probe(struct platform_device *pdev)
>>> cdd->first_completion_queue = glue_info->first_completion_queue;
>>> cdd->platform = glue_info->platform;
>>>
>>> + if (is_da8xx_cppi41(dev)) {
>>> + cdd->clk = devm_clk_get(&pdev->dev, "usb20");
>>> + ret = PTR_ERR_OR_ZERO(cdd->clk);
>>> + if (ret) {
>>> + dev_err(&pdev->dev, "failed to get clock\n");
>>> + goto err_clk_en;
>>> + }
>>> +
>>> + ret = clk_prepare_enable(cdd->clk);
>>> + if (ret) {
>>> + dev_err(dev, "failed to enable clock\n");
>>> + goto err_clk_en;
>>> + }
>>> + }
>>
>> if this is functional clock then why not to use ./arch/arm/mach-davinci/pm_domain.c ?
>> wouldn't it work for use if you will just rename "usb20" -> "fck" -
>> so PM runtime should manage this clock for you?
> As is, I don't think it will work.
> The usb20 is shared by the cppi41 and the usb otg.
> So, if we rename "usb20" to "fck", clk_get() won't be able to find the
> clock.
> But may be adding "usb20" to "con_ids" in
> arch/arm/mach-davinci/pm_domain.c could work.
> But I think it will require some changes in da8xx musb driver.
> I will take look.
On DA8xx, CPPI 4.1 DMAengine is not an independent system resource, but
embedded within the USB 2.0 controller. So, I think all that is needed
is for MUSB DA8xx glue to trigger probe of CPPI 4.1 dmaengine driver
when it is ready. I am not sure all this DA850-specific clock handling
is really necessary.
Even in DT, the CPPI 4.1 node should be a child node of USB 2.0 node.
Thanks,
sekhar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
