Hi Rob,
Happy new year,
And thank you for the review.
On 12/01/2016 12:03 AM, Rob Herring wrote:
> On Fri, Nov 25, 2016 at 04:56:53PM +0200, Todor Tomov wrote:
>> Add DT binding document for Qualcomm Camera subsystem driver.
>>
>> Signed-off-by: Todor Tomov <todor.tomov@xxxxxxxxxx>
>> ---
>> .../devicetree/bindings/media/qcom,camss.txt | 196 +++++++++++++++++++++
>> 1 file changed, 196 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/media/qcom,camss.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt b/Documentation/devicetree/bindings/media/qcom,camss.txt
>> new file mode 100644
>> index 0000000..76ad89a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/qcom,camss.txt
>> @@ -0,0 +1,196 @@
>> +Qualcomm Camera Subsystem
>> +
>> +* Properties
>> +
>> +- compatible:
>> + Usage: required
>> + Value type: <stringlist>
>> + Definition: Should contain:
>> + - "qcom,8x16-camss"
>
> Don't use wildcards in compatible strings. One string per SoC.
Ok, I'll fix this.
>
>> +- reg:
>> + Usage: required
>> + Value type: <prop-encoded-array>
>> + Definition: Register ranges as listed in the reg-names property.
>> +- reg-names:
>> + Usage: required
>> + Value type: <stringlist>
>> + Definition: Should contain the following entries:
>> + - "csiphy0"
>> + - "csiphy0_clk_mux"
>> + - "csiphy1"
>> + - "csiphy1_clk_mux"
>> + - "csid0"
>> + - "csid1"
>> + - "ispif"
>> + - "csi_clk_mux"
>> + - "vfe0"
>
> Kind of looks like the phy's should be separate nodes since each phy has
> its own register range, irq, clocks, etc.
Yes, there are a lot of hardware resources here.
I have decided to keep everything into a single platform device as this
represents it better from system point of view.
>
>> +- interrupts:
>> + Usage: required
>> + Value type: <prop-encoded-array>
>> + Definition: Interrupts as listed in the interrupt-names property.
>> +- interrupt-names:
>> + Usage: required
>> + Value type: <stringlist>
>> + Definition: Should contain the following entries:
>> + - "csiphy0"
>> + - "csiphy1"
>> + - "csid0"
>> + - "csid1"
>> + - "ispif"
>> + - "vfe0"
>> +- power-domains:
>> + Usage: required
>> + Value type: <prop-encoded-array>
>> + Definition: A phandle and power domain specifier pairs to the
>> + power domain which is responsible for collapsing
>> + and restoring power to the peripheral.
>> +- clocks:
>> + Usage: required
>> + Value type: <prop-encoded-array>
>> + Definition: A list of phandle and clock specifier pairs as listed
>> + in clock-names property.
>> +- clock-names:
>> + Usage: required
>> + Value type: <stringlist>
>> + Definition: Should contain the following entries:
>> + - "camss_top_ahb_clk"
>> + - "ispif_ahb_clk"
>> + - "csiphy0_timer_clk"
>> + - "csiphy1_timer_clk"
>> + - "csi0_ahb_clk"
>> + - "csi0_clk"
>> + - "csi0_phy_clk"
>> + - "csi0_pix_clk"
>> + - "csi0_rdi_clk"
>> + - "csi1_ahb_clk"
>> + - "csi1_clk"
>> + - "csi1_phy_clk"
>> + - "csi1_pix_clk"
>> + - "csi1_rdi_clk"
>> + - "camss_ahb_clk"
>> + - "camss_vfe_vfe_clk"
>> + - "camss_csi_vfe_clk"
>> + - "iface_clk"
>> + - "bus_clk"
>> +- vdda-supply:
>> + Usage: required
>> + Value type: <phandle>
>> + Definition: A phandle to voltage supply for CSI2.
>> +- iommus:
>> + Usage: required
>> + Value type: <prop-encoded-array>
>> + Definition: A list of phandle and IOMMU specifier pairs.
>> +
>> +* Nodes
>> +
>> +- ports:
>> + Usage: required
>> + Definition: As described in video-interfaces.txt in same directory.
>> + Properties:
>> + - reg:
>> + Usage: required
>> + Value type: <u32>
>> + Definition: Selects CSI2 PHY interface - PHY0 or PHY1.
>> + Endpoint node properties:
>> + - clock-lanes:
>> + Usage: required
>> + Value type: <u32>
>> + Definition: The clock lane.
>> + - data-lanes:
>> + Usage: required
>> + Value type: <prop-encoded-array>
>> + Definition: An array of data lanes.
>> + - qcom,settle-cnt:
>
> This should go in phy node ideally.
>
>> + Usage: required
>> + Value type: <u32>
>> + Definition: The settle count parameter for CSI PHY.
>> +
>> +* An Example
>> +
>> + camss: camss@1b00000 {
>> + compatible = "qcom,8x16-camss";
>> + reg = <0x1b0ac00 0x200>,
>> + <0x1b00030 0x4>,
>> + <0x1b0b000 0x200>,
>> + <0x1b00038 0x4>,
>> + <0x1b08000 0x100>,
>> + <0x1b08400 0x100>,
>> + <0x1b0a000 0x500>,
>> + <0x1b00020 0x10>,
>> + <0x1b10000 0x1000>;
>> + reg-names = "csiphy0",
>> + "csiphy0_clk_mux",
>> + "csiphy1",
>> + "csiphy1_clk_mux",
>> + "csid0",
>> + "csid1",
>> + "ispif",
>> + "csi_clk_mux",
>> + "vfe0";
>> + interrupts = <GIC_SPI 78 0>,
>> + <GIC_SPI 79 0>,
>> + <GIC_SPI 51 0>,
>> + <GIC_SPI 52 0>,
>> + <GIC_SPI 55 0>,
>> + <GIC_SPI 57 0>;
>> + interrupt-names = "csiphy0",
>> + "csiphy1",
>> + "csid0",
>> + "csid1",
>> + "ispif",
>> + "vfe0";
>> + power-domains = <&gcc VFE_GDSC>;
>> + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
>> + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
>> + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
>> + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
>> + <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
>> + <&gcc GCC_CAMSS_CSI0_CLK>,
>> + <&gcc GCC_CAMSS_CSI0PHY_CLK>,
>> + <&gcc GCC_CAMSS_CSI0PIX_CLK>,
>> + <&gcc GCC_CAMSS_CSI0RDI_CLK>,
>> + <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
>> + <&gcc GCC_CAMSS_CSI1_CLK>,
>> + <&gcc GCC_CAMSS_CSI1PHY_CLK>,
>> + <&gcc GCC_CAMSS_CSI1PIX_CLK>,
>> + <&gcc GCC_CAMSS_CSI1RDI_CLK>,
>> + <&gcc GCC_CAMSS_AHB_CLK>,
>> + <&gcc GCC_CAMSS_VFE0_CLK>,
>> + <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
>> + <&gcc GCC_CAMSS_VFE_AHB_CLK>,
>> + <&gcc GCC_CAMSS_VFE_AXI_CLK>;
>> + clock-names = "camss_top_ahb_clk",
>> + "ispif_ahb_clk",
>> + "csiphy0_timer_clk",
>> + "csiphy1_timer_clk",
>> + "csi0_ahb_clk",
>> + "csi0_clk",
>> + "csi0_phy_clk",
>> + "csi0_pix_clk",
>> + "csi0_rdi_clk",
>> + "csi1_ahb_clk",
>> + "csi1_clk",
>> + "csi1_phy_clk",
>> + "csi1_pix_clk",
>> + "csi1_rdi_clk",
>> + "camss_ahb_clk",
>> + "camss_vfe_vfe_clk",
>> + "camss_csi_vfe_clk",
>> + "iface_clk",
>> + "bus_clk";
>> + vdda-supply = <&pm8916_l2>;
>> + iommus = <&apps_iommu 3>;
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + port@0 {
>> + reg = <0>;
>> + csiphy0_ep: endpoint {
>> + clock-lanes = <1>;
>> + data-lanes = <0 2>;
>> + qcom,settle-cnt = <0xe>;
>> + remote-endpoint = <&ov5645_ep>;
>> + };
>> + };
>> + };
>> + };
>> --
>> 1.9.1
>>
--
Best regards,
Todor Tomov
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
