[PATCH v3 4/5] dt: bindings: i2c-mux-pca954x: Add documentation for i2c-mux-irq-mask-en

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Unfortunately some hardware device will assert their irq line immediately
on power on and provide no mechanism to mask the irq. As the i2c muxes
provide no method to mask irq line this provides a work around by keeping
the parent irq masked until enough device drivers have loaded to service
all pending interrupts.

For example the the ltc1760 assert its SMBALERT irq immediately on power
on. With two ltc1760 attached to bus 0 & 1 on a pca954x mux when the first
device is registered irq are enabled and fire continuously as the second
device driver has not yet loaded. Setting this parameter to 0x3 while
delay the irq being enabled until both devices are ready.

Acked-by: Peter Rosin <peda@xxxxxxxxxx>
Signed-off-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
index aa09704..6de1e8e 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
@@ -19,6 +19,8 @@ Optional Properties:
   - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
     children in idle state. This is necessary for example, if there are several
     multiplexers on the bus and the devices behind them use same I2C addresses.
+  - nxp,irq-mask-enable: BitMask; Defines a mask for which irq lines need to be
+    unmasked before the parent irq line in enabled.
   - interrupt-parent: Phandle for the interrupt controller that services
     interrupts for this device.
   - interrupts: Interrupt mapping for IRQ.
@@ -36,6 +38,7 @@ Example:
 		#size-cells = <0>;
 		reg = <0x74>;
 
+		nxp,irq-mask-enable = <0x3>;
 		interrupt-parent = <&ipic>;
 		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux