This patch adds support for TI TMP007 - 16 bit IR thermopile sensor with integrated Math engine. Sensor takes care of calculating the object temperature with the help of calibrated constants stored in non-volatile memory, reducing the calculation overhead. Signed-off-by: Mani Sadhasivam <manivannanece23@xxxxxxxxx> --- .../devicetree/bindings/iio/temperature/tmp007.txt | 16 + drivers/iio/temperature/Kconfig | 10 + drivers/iio/temperature/Makefile | 1 + drivers/iio/temperature/tmp007.c | 338 +++++++++++++++++++++ 4 files changed, 365 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/temperature/tmp007.txt create mode 100644 drivers/iio/temperature/tmp007.c diff --git a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt new file mode 100644 index 0000000..9ae0519 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt @@ -0,0 +1,16 @@ +* TI TMP007 - IR thermopile sensor with integrated math engine + +Link to datasheet: http://www.ti.com/lit/ds/symlink/tmp007.pdf + +Required properties: + + - compatible: should be "ti,tmp007" + - reg: the I2C address of the sensor (changeable via ADR pins) + +Example: + +tmp007@40 { + compatible = "ti,tmp007"; + reg = <0x40>; +}; + diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig index c4664e5..538ce9e 100644 --- a/drivers/iio/temperature/Kconfig +++ b/drivers/iio/temperature/Kconfig @@ -23,6 +23,16 @@ config TMP006 This driver can also be built as a module. If so, the module will be called tmp006. +config TMP007 + tristate "TMP007 infrared thermopile sensor with Integrated Math Engine" + depends on I2C + help + If you say yes here you get support for the Texas Instruments + TMP007 infrared thermopile sensor with Integrated Math Engine. + + This driver can also be built as a module. If so, the module will + be called tmp007. + config TSYS01 tristate "Measurement Specialties TSYS01 temperature sensor using I2C bus connection" depends on I2C diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile index 02bc79d..f0cf5c5 100644 --- a/drivers/iio/temperature/Makefile +++ b/drivers/iio/temperature/Makefile @@ -4,5 +4,6 @@ obj-$(CONFIG_MLX90614) += mlx90614.o obj-$(CONFIG_TMP006) += tmp006.o +obj-$(CONFIG_TMP007) += tmp007.o obj-$(CONFIG_TSYS01) += tsys01.o obj-$(CONFIG_TSYS02D) += tsys02d.o diff --git a/drivers/iio/temperature/tmp007.c b/drivers/iio/temperature/tmp007.c new file mode 100644 index 0000000..b76fecc --- /dev/null +++ b/drivers/iio/temperature/tmp007.c @@ -0,0 +1,338 @@ +/* + * tmp007.c - Support for TI TMP007 IR thermopile sensor with integrated math engine + * + * Copyright (c) 2017 Manivannan Sadhasivam <manivannanece23@xxxxxxxxx> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * Driver for the Texas Instruments I2C 16-bit IR thermopile sensor + * + * (7-bit I2C slave address (0x40 - 0x47), changeable via ADR pins) + * + * Note: This driver assumes that the sensor has been calibrated beforehand + * + * TODO: ALERT irq, limit threshold events + * + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/bitops.h> +#include <linux/of.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define TMP007_TDIE 0x01 +#define TMP007_CONFIG 0x02 +#define TMP007_TOBJECT 0x03 +#define TMP007_STATUS 0x04 +#define TMP007_STATUS_MASK 0x05 +#define TMP007_MANUFACTURER_ID 0x1e +#define TMP007_DEVICE_ID 0x1f + +#define TMP007_CONFIG_CONV_EN BIT(12) +#define TMP007_CONFIG_COMP_EN BIT(5) +#define TMP007_CONFIG_TC_EN BIT(6) +#define TMP007_CONFIG_CR_MASK GENMASK(11, 9) +#define TMP007_CONFIG_CR_SHIFT 9 + +#define TMP007_STATUS_CONV_READY BIT(14) +#define TMP007_STATUS_DATA_VALID BIT(9) + +#define TMP007_MANUFACTURER_MAGIC 0x5449 +#define TMP007_DEVICE_MAGIC 0x0078 + +#define TMP007_TEMP_SHIFT 2 + +struct tmp007_data { + struct i2c_client *client; + u16 config; + u16 status_mask; +}; + +static const int tmp007_avgs[5][2] = { {4, 0}, {2, 0}, {1, 0}, + {0, 500000}, {0, 250000} }; + +static int tmp007_read_temperature(struct tmp007_data *data, u8 reg) +{ + s32 ret; + int tries = 50; + + while (tries-- > 0) { + ret = i2c_smbus_read_word_swapped(data->client, + TMP007_STATUS); + if (ret < 0) + return ret; + if ((ret & TMP007_STATUS_CONV_READY) && + !(ret & TMP007_STATUS_DATA_VALID)) + break; + msleep(100); + } + + if (tries < 0) + return -EIO; + + return i2c_smbus_read_word_swapped(data->client, reg); +} + +static int tmp007_powerdown(struct tmp007_data *data) +{ + return i2c_smbus_write_word_swapped(data->client, TMP007_CONFIG, + data->config & ~TMP007_CONFIG_CONV_EN); +} + +static int tmp007_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, int *val, + int *val2, long mask) +{ + struct tmp007_data *data = iio_priv(indio_dev); + s32 ret; + int conv_rate; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (channel->channel2) { + case IIO_MOD_TEMP_AMBIENT: /* LSB: 0.03125 degree Celsius */ + ret = i2c_smbus_read_word_swapped(data->client, TMP007_TDIE); + if (ret < 0) + return ret; + break; + case IIO_MOD_TEMP_OBJECT: + ret = tmp007_read_temperature(data, TMP007_TOBJECT); + if (ret < 0) + return ret; + break; + default: + return -EINVAL; + } + + *val = sign_extend32(ret, 15) >> TMP007_TEMP_SHIFT; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 31; + *val2 = 250000; + + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_SAMP_FREQ: + conv_rate = (data->config & TMP007_CONFIG_CR_MASK) + >> TMP007_CONFIG_CR_SHIFT; + *val = tmp007_avgs[conv_rate][0]; + *val2 = tmp007_avgs[conv_rate][1]; + + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static int tmp007_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, int val, + int val2, long mask) +{ + struct tmp007_data *data = iio_priv(indio_dev); + int i; + u16 tmp; + + if (mask == IIO_CHAN_INFO_SAMP_FREQ) { + for (i = 0; i < ARRAY_SIZE(tmp007_avgs); i++) { + if ((val == tmp007_avgs[i][0]) && + (val2 == tmp007_avgs[i][1])) { + tmp = data->config & ~TMP007_CONFIG_CR_MASK; + tmp |= (i << TMP007_CONFIG_CR_SHIFT); + + return i2c_smbus_write_word_swapped(data->client, + TMP007_CONFIG, + data->config = tmp); + } + } + } + + return -EINVAL; +} + +static IIO_CONST_ATTR(sampling_frequency_available, "4 2 1 0.5 0.25"); + +static struct attribute *tmp007_attributes[] = { + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group tmp007_attribute_group = { + .attrs = tmp007_attributes, +}; + +static const struct iio_chan_spec tmp007_channels[] = { + { + .type = IIO_TEMP, + .modified = 1, + .channel2 = IIO_MOD_TEMP_AMBIENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + }, + { + .type = IIO_TEMP, + .modified = 1, + .channel2 = IIO_MOD_TEMP_OBJECT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + } +}; + +static const struct iio_info tmp007_info = { + .read_raw = tmp007_read_raw, + .write_raw = tmp007_write_raw, + .attrs = &tmp007_attribute_group, + .driver_module = THIS_MODULE, +}; + +static bool tmp007_identify(struct i2c_client *client) +{ + int manf_id, dev_id; + + manf_id = i2c_smbus_read_word_swapped(client, TMP007_MANUFACTURER_ID); + if (manf_id < 0) + return false; + + dev_id = i2c_smbus_read_word_swapped(client, TMP007_DEVICE_ID); + if (dev_id < 0) + return false; + + return (manf_id == TMP007_MANUFACTURER_MAGIC && dev_id == TMP007_DEVICE_MAGIC); +} + +static int tmp007_probe(struct i2c_client *client, + const struct i2c_device_id *tmp007_id) +{ + struct tmp007_data *data; + struct iio_dev *indio_dev; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -EOPNOTSUPP; + + if (!tmp007_identify(client)) { + dev_err(&client->dev, "TMP007 not found\n"); + return -ENODEV; + } + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + + indio_dev->dev.parent = &client->dev; + indio_dev->name = dev_name(&client->dev); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &tmp007_info; + + indio_dev->channels = tmp007_channels; + indio_dev->num_channels = ARRAY_SIZE(tmp007_channels); + + /* Set Configuration register: + * 1. Conversion ON + * 2. Comparator mode + * 3. Transient correction enable + */ + + ret = i2c_smbus_read_word_swapped(data->client, TMP007_CONFIG); + if (ret < 0) + return ret; + + data->config = ret; + data->config |= (TMP007_CONFIG_CONV_EN | TMP007_CONFIG_COMP_EN | TMP007_CONFIG_TC_EN); + + ret = i2c_smbus_write_word_swapped(data->client, TMP007_CONFIG, + data->config); + if (ret < 0) + return ret; + + /* Set Status Mask register: + * 1. Conversion ready enable + */ + + ret = i2c_smbus_read_word_swapped(data->client, TMP007_STATUS_MASK); + if (ret < 0) + return tmp007_powerdown(data); + + data->status_mask = ret; + data->status_mask |= TMP007_STATUS_CONV_READY; + + ret = i2c_smbus_write_word_swapped(data->client, TMP007_STATUS_MASK, + data->status_mask); + if (ret < 0) + return tmp007_powerdown(data); + + return iio_device_register(indio_dev); +} + +static int tmp007_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct tmp007_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + tmp007_powerdown(data); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int tmp007_suspend(struct device *dev) +{ + struct tmp007_data *data = iio_priv(i2c_get_clientdata( + to_i2c_client(dev))); + + return tmp007_powerdown(data); +} + +static int tmp007_resume(struct device *dev) +{ + struct tmp007_data *data = iio_priv(i2c_get_clientdata( + to_i2c_client(dev))); + + return i2c_smbus_write_word_swapped(data->client, TMP007_CONFIG, + data->config | TMP007_CONFIG_CONV_EN); +} +#endif + +static SIMPLE_DEV_PM_OPS(tmp007_pm_ops, tmp007_suspend, tmp007_resume); + +static const struct of_device_id tmp007_of_match[] = { + { .compatible = "ti,tmp007", }, + { }, +}; +MODULE_DEVICE_TABLE(of, tmp007_of_match); + +static const struct i2c_device_id tmp007_id[] = { + { "tmp007", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tmp007_id); + +static struct i2c_driver tmp007_driver = { + .driver = { + .name = "tmp007", + .of_match_table = of_match_ptr(tmp007_of_match), + .pm = &tmp007_pm_ops, + }, + .probe = tmp007_probe, + .remove = tmp007_remove, + .id_table = tmp007_id, +}; +module_i2c_driver(tmp007_driver); + +MODULE_AUTHOR("Manivannan Sadhasivam <manivannanece23@xxxxxxxxx>"); +MODULE_DESCRIPTION("TI TMP007 IR thermopile sensor driver"); +MODULE_LICENSE("GPL"); -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
