On Wed, Jan 4, 2017 at 6:21 PM, Dinh Nguyen <dinguyen@xxxxxxxxxx> wrote: > From: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx> > > Add h2f and lwh2f bridges. > Add base FPGA Region to support DT overlays for FPGA programming. > Add l3regs. > > Signed-off-by: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx> > Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxx> > --- > arch/arm/boot/dts/socfpga.dtsi | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi > index de29172..dccc281 100644 > --- a/arch/arm/boot/dts/socfpga.dtsi > +++ b/arch/arm/boot/dts/socfpga.dtsi > @@ -93,6 +93,16 @@ > }; > }; > > + base_fpga_region { > + compatible = "fpga-region"; > + fpga-mgr = <&fpgamgr0>; > + fpga-bridges = <&fpga_bridge0>, <&fpga_bridge1>; Hi Dinh, We want to get rid of the 'fpga-bridges' line. > + > + #address-cells = <0x1>; > + #size-cells = <0x1>; > + ranges = <0 0xff200000 0x100000>; Should get rid of the ranges line here too. The 'fpga-bridges' and 'ranges' line can be added in the overlay. Alan > + }; > + > can0: can@ffc00000 { > compatible = "bosch,d_can"; > reg = <0xffc00000 0x1000>; > @@ -513,6 +523,22 @@ > }; > }; > > + fpga_bridge0: fpga_bridge@ff400000 { > + compatible = "altr,socfpga-lwhps2fpga-bridge"; > + reg = <0xff400000 0x100000>; > + resets = <&rst LWHPS2FPGA_RESET>; > + reset-names = "lwhps2fpga"; > + clocks = <&l4_main_clk>; > + }; > + > + fpga_bridge1: fpga_bridge@ff500000 { > + compatible = "altr,socfpga-hps2fpga-bridge"; > + reg = <0xff500000 0x10000>; > + resets = <&rst HPS2FPGA_RESET>; > + reset-names = "hps2fpga"; > + clocks = <&l4_main_clk>; > + }; > + > fpgamgr0: fpgamgr@ff706000 { > compatible = "altr,socfpga-fpga-mgr"; > reg = <0xff706000 0x1000 > @@ -694,6 +720,11 @@ > arm,prefetch-offset = <7>; > }; > > + l3regs@0xff800000 { > + compatible = "altr,l3regs", "syscon"; > + reg = <0xff800000 0x1000>; > + }; > + > mmc: dwmmc0@ff704000 { > compatible = "altr,socfpga-dw-mshc"; > reg = <0xff704000 0x1000>; > -- > 2.7.4 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html