This hardware block could at used at same time for PWM generation and IIO timers. PWM and IIO timer configuration are mixed in the same registers so we need a multi fonction driver to be able to share those registers. version 7: - rebase on v4.10-rc2 version 6: - rename files to stm32-timers - rename functions to stm32_timers_xxx version 5: - fix Lee comments about detect function - add missing dependency on REGMAP_MMIO version 4: - add a function to detect Auto Reload Register (ARR) size - rename the structure shared with other drivers version 2: - rename driver "stm32-gptimer" to be align with SoC documentation - only keep one compatible - use of_platform_populate() instead of devm_mfd_add_devices() Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx> --- .../devicetree/bindings/mfd/stm32-timers.txt | 2 +- drivers/mfd/Kconfig | 11 +++ drivers/mfd/Makefile | 2 + drivers/mfd/stm32-timers.c | 80 ++++++++++++++++++++++ include/linux/mfd/stm32-timers.h | 71 +++++++++++++++++++ 5 files changed, 165 insertions(+), 1 deletion(-) create mode 100644 drivers/mfd/stm32-timers.c create mode 100644 include/linux/mfd/stm32-timers.h diff --git a/Documentation/devicetree/bindings/mfd/stm32-timers.txt b/Documentation/devicetree/bindings/mfd/stm32-timers.txt index a73301d..897e7c2 100644 --- a/Documentation/devicetree/bindings/mfd/stm32-timers.txt +++ b/Documentation/devicetree/bindings/mfd/stm32-timers.txt @@ -12,7 +12,7 @@ Required parameters: - reg: Physical base address and length of the controller's registers. -- clock-names: Set to "int". +- clock-names: Set to "int". - clocks: Phandle to the clock used by the timer module. For Clk properties, please refer to ../clock/clock-bindings.txt diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 4ce3b6f..d0c14b8 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1621,6 +1621,17 @@ config MFD_STW481X in various ST Microelectronics and ST-Ericsson embedded Nomadik series. +config MFD_STM32_TIMERS + tristate "Support for STM32 Timers" + depends on (ARCH_STM32 && OF) || COMPILE_TEST + select MFD_CORE + select REGMAP + select REGMAP_MMIO + help + Select this option to enable STM32 timers driver used + for PWM and IIO Timer. This driver allow to share the + registers between the others drivers. + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index dda4d4f..876ca86 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -212,3 +212,5 @@ obj-$(CONFIG_MFD_MT6397) += mt6397-core.o obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o + +obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o diff --git a/drivers/mfd/stm32-timers.c b/drivers/mfd/stm32-timers.c new file mode 100644 index 0000000..41bd901 --- /dev/null +++ b/drivers/mfd/stm32-timers.c @@ -0,0 +1,80 @@ +/* + * Copyright (C) STMicroelectronics 2016 + * + * Author: Benjamin Gaignard <benjamin.gaignard@xxxxxx> + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#include <linux/mfd/stm32-timers.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/reset.h> + +static const struct regmap_config stm32_timers_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = sizeof(u32), + .max_register = 0x400, +}; + +static void stm32_timers_get_arr_size(struct stm32_timers *ddata) +{ + /* + * Only the available bits will be written so when readback + * we get the maximum value of auto reload register + */ + regmap_write(ddata->regmap, TIM_ARR, ~0L); + regmap_read(ddata->regmap, TIM_ARR, &ddata->max_arr); + regmap_write(ddata->regmap, TIM_ARR, 0x0); +} + +static int stm32_timers_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct stm32_timers *ddata; + struct resource *res; + void __iomem *mmio; + + ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(mmio)) + return PTR_ERR(mmio); + + ddata->regmap = devm_regmap_init_mmio_clk(dev, "int", mmio, + &stm32_timers_regmap_cfg); + if (IS_ERR(ddata->regmap)) + return PTR_ERR(ddata->regmap); + + ddata->clk = devm_clk_get(dev, NULL); + if (IS_ERR(ddata->clk)) + return PTR_ERR(ddata->clk); + + stm32_timers_get_arr_size(ddata); + + platform_set_drvdata(pdev, ddata); + + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); +} + +static const struct of_device_id stm32_timers_of_match[] = { + { .compatible = "st,stm32-timers", }, + { /* end node */ }, +}; +MODULE_DEVICE_TABLE(of, stm32_timers_of_match); + +static struct platform_driver stm32_timers_driver = { + .probe = stm32_timers_probe, + .driver = { + .name = "stm32-timers", + .of_match_table = stm32_timers_of_match, + }, +}; +module_platform_driver(stm32_timers_driver); + +MODULE_DESCRIPTION("STMicroelectronics STM32 Timers"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h new file mode 100644 index 0000000..d030004 --- /dev/null +++ b/include/linux/mfd/stm32-timers.h @@ -0,0 +1,71 @@ +/* + * Copyright (C) STMicroelectronics 2016 + * + * Author: Benjamin Gaignard <benjamin.gaignard@xxxxxx> + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#ifndef _LINUX_STM32_GPTIMER_H_ +#define _LINUX_STM32_GPTIMER_H_ + +#include <linux/clk.h> +#include <linux/regmap.h> + +#define TIM_CR1 0x00 /* Control Register 1 */ +#define TIM_CR2 0x04 /* Control Register 2 */ +#define TIM_SMCR 0x08 /* Slave mode control reg */ +#define TIM_DIER 0x0C /* DMA/interrupt register */ +#define TIM_SR 0x10 /* Status register */ +#define TIM_EGR 0x14 /* Event Generation Reg */ +#define TIM_CCMR1 0x18 /* Capt/Comp 1 Mode Reg */ +#define TIM_CCMR2 0x1C /* Capt/Comp 2 Mode Reg */ +#define TIM_CCER 0x20 /* Capt/Comp Enable Reg */ +#define TIM_PSC 0x28 /* Prescaler */ +#define TIM_ARR 0x2c /* Auto-Reload Register */ +#define TIM_CCR1 0x34 /* Capt/Comp Register 1 */ +#define TIM_CCR2 0x38 /* Capt/Comp Register 2 */ +#define TIM_CCR3 0x3C /* Capt/Comp Register 3 */ +#define TIM_CCR4 0x40 /* Capt/Comp Register 4 */ +#define TIM_BDTR 0x44 /* Break and Dead-Time Reg */ + +#define TIM_CR1_CEN BIT(0) /* Counter Enable */ +#define TIM_CR1_ARPE BIT(7) /* Auto-reload Preload Ena */ +#define TIM_CR2_MMS (BIT(4) | BIT(5) | BIT(6)) /* Master mode selection */ +#define TIM_SMCR_SMS (BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */ +#define TIM_SMCR_TS (BIT(4) | BIT(5) | BIT(6)) /* Trigger selection */ +#define TIM_DIER_UIE BIT(0) /* Update interrupt */ +#define TIM_SR_UIF BIT(0) /* Update interrupt flag */ +#define TIM_EGR_UG BIT(0) /* Update Generation */ +#define TIM_CCMR_PE BIT(3) /* Channel Preload Enable */ +#define TIM_CCMR_M1 (BIT(6) | BIT(5)) /* Channel PWM Mode 1 */ +#define TIM_CCER_CC1E BIT(0) /* Capt/Comp 1 out Ena */ +#define TIM_CCER_CC1P BIT(1) /* Capt/Comp 1 Polarity */ +#define TIM_CCER_CC1NE BIT(2) /* Capt/Comp 1N out Ena */ +#define TIM_CCER_CC1NP BIT(3) /* Capt/Comp 1N Polarity */ +#define TIM_CCER_CC2E BIT(4) /* Capt/Comp 2 out Ena */ +#define TIM_CCER_CC3E BIT(8) /* Capt/Comp 3 out Ena */ +#define TIM_CCER_CC4E BIT(12) /* Capt/Comp 4 out Ena */ +#define TIM_CCER_CCXE (BIT(0) | BIT(4) | BIT(8) | BIT(12)) +#define TIM_BDTR_BKE BIT(12) /* Break input enable */ +#define TIM_BDTR_BKP BIT(13) /* Break input polarity */ +#define TIM_BDTR_AOE BIT(14) /* Automatic Output Enable */ +#define TIM_BDTR_MOE BIT(15) /* Main Output Enable */ +#define TIM_BDTR_BKF (BIT(16) | BIT(17) | BIT(18) | BIT(19)) +#define TIM_BDTR_BK2F (BIT(20) | BIT(21) | BIT(22) | BIT(23)) +#define TIM_BDTR_BK2E BIT(24) /* Break 2 input enable */ +#define TIM_BDTR_BK2P BIT(25) /* Break 2 input polarity */ + +#define MAX_TIM_PSC 0xFFFF +#define TIM_CR2_MMS_SHIFT 4 +#define TIM_SMCR_TS_SHIFT 4 +#define TIM_BDTR_BKF_MASK 0xF +#define TIM_BDTR_BKF_SHIFT 16 +#define TIM_BDTR_BK2F_SHIFT 20 + +struct stm32_timers { + struct clk *clk; + struct regmap *regmap; + u32 max_arr; +}; +#endif -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html