On Wed, Dec 21, 2016 at 02:25:19PM +0100, Uwe Kleine-König wrote: > On Wed, Dec 21, 2016 at 03:58:45PM +0300, Nikita Yushchenko wrote: > > > Remove 'fixed-link' nodes from DSA ports since they are not needed (they > > > are not limiting link's speed and the ports will be configured to their > > > maximux speed as a default) > > > > > > Suggested-by: Andrew Lunn <andrew@xxxxxxx> > > > Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx> > > > > With this patch, ports connected to revB's second switch stop working. > > This is probably because without a fixed-link node the phy-mode setting > isn't applied by the driver. Yep, bad suggestion from me. If the phy-mode was not needed, then you can drop the fixed-link. With the phy-mode, you also need the fixed link. Sorry for the wasted time, Andrew -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html