On Tue, Dec 13, 2016 at 02:32:36PM +0000, Ramiro Oliveira wrote:
> Create device tree bindings documentation.
>
> Signed-off-by: Ramiro Oliveira <roliveir@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/media/i2c/ov5647.txt | 35 ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
> new file mode 100644
> index 0000000..46e5e30
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
> @@ -0,0 +1,35 @@
> +Omnivision OV5647 raw image sensor
> +---------------------------------
> +
> +OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
> +and CCI (I2C compatible) control bus.
> +
> +Required properties:
> +
> +- compatible : "ovti,ov5647";
> +- reg : I2C slave address of the sensor;
> +- clocks : Reference to the xclk clock.
> +- clock-names : Should be "xclk".
> +- clock-frequency: Frequency of the xclk clock
> +
> +The common video interfaces bindings (see video-interfaces.txt) should be
> +used to specify link to the image data receiver. The OV5647 device
> +node should contain one 'port' child node with an 'endpoint' subnode.
Would be good to add optional regulator supply properties, but that can
come later.
> +
> +Example:
> +
> + i2c@0x02000 {
No '0x' or leading 0s on unit addresses.
> + ...
> + ov: camera@0x36 {
ditto.
> + compatible = "ovti,ov5647";
> + reg = <0x36>;
> + clocks = <&camera_clk>;
> + clock-names = "xclk";
> + clock-frequency = <30000000>;
> + port {
> + camera_1: endpoint {
> + remote-endpoint = <&csi1_ep1>;
> + };
> + };
> + };
> + };
> --
> 2.10.2
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
