Create device tree bindings documentation. Signed-off-by: Ramiro Oliveira <roliveir@xxxxxxxxxxxx> --- .../devicetree/bindings/media/i2c/ov5647.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt new file mode 100644 index 0000000..46e5e30 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt @@ -0,0 +1,35 @@ +Omnivision OV5647 raw image sensor +--------------------------------- + +OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces +and CCI (I2C compatible) control bus. + +Required properties: + +- compatible : "ovti,ov5647"; +- reg : I2C slave address of the sensor; +- clocks : Reference to the xclk clock. +- clock-names : Should be "xclk". +- clock-frequency: Frequency of the xclk clock + +The common video interfaces bindings (see video-interfaces.txt) should be +used to specify link to the image data receiver. The OV5647 device +node should contain one 'port' child node with an 'endpoint' subnode. + +Example: + + i2c@0x02000 { + ... + ov: camera@0x36 { + compatible = "ovti,ov5647"; + reg = <0x36>; + clocks = <&camera_clk>; + clock-names = "xclk"; + clock-frequency = <30000000>; + port { + camera_1: endpoint { + remote-endpoint = <&csi1_ep1>; + }; + }; + }; + }; -- 2.10.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html