Hi Bartosz,
Thank you for the patch.
On Wednesday 07 Dec 2016 11:42:44 Bartosz Golaszewski wrote:
> Add the vga-bridge node to the board DT together with corresponding
> ports and vga connector. This allows to retrieve the edid info from
> the display automatically.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/da850-lcdk.dts | 67 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 67 insertions(+)
>
> diff --git a/arch/arm/boot/dts/da850-lcdk.dts
> b/arch/arm/boot/dts/da850-lcdk.dts index afcb482..39602eb 100644
> --- a/arch/arm/boot/dts/da850-lcdk.dts
> +++ b/arch/arm/boot/dts/da850-lcdk.dts
> @@ -51,6 +51,51 @@
> system-clock-frequency = <24576000>;
> };
> };
> +
> + vga-bridge {
> + compatible = "ti,ths8135";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + vga_bridge_in: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&lcdc_out_vga>;
> + };
> + };
> +
> + port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + vga_bridge_out: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&vga_con_in>;
> + };
> + };
> + };
> + };
> +
> + vga {
> + compatible = "vga-connector";
> +
> + ddc-i2c-bus = <&i2c0>;
> +
> + port {
> + vga_con_in: endpoint {
> + remote-endpoint = <&vga_bridge_out>;
> + };
> + };
> + };
> };
>
> &pmx_core {
> @@ -236,3 +281,25 @@
> &memctrl {
> status = "okay";
> };
> +
> +&lcdc {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&lcd_pins>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + lcdc_out: port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + lcdc_out_vga: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&vga_bridge_in>;
> + };
> + };
Just to make sure you're aware, when there's a single endpoint you can
simplify the DT by omitting the endpoint number. This would become
lcdc_out: port@1 {
reg = <1>;
lcdc_out_vga: endpoint {
remote-endpoint = <&vga_bridge_in>;
};
};
It's entirely up to you, both get my
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> + };
> +};
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
