Re: [PATCH v3 7/7] ARM: dts: stm32: add stm32 general purpose timer driver in DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, 05 Dec 2016, Alexandre Torgue wrote:
> On 12/02/2016 02:22 PM, Lee Jones wrote:
> > On Fri, 02 Dec 2016, Benjamin Gaignard wrote:
> > 
> > > Add general purpose timers and it sub-nodes into DT for stm32f4.
> > > Define and enable pwm1 and pwm3 for stm32f469 discovery board
> > > 
> > > version 3:
> > > - use "st,stm32-timer-trigger" in DT
> > > 
> > > version 2:
> > > - use parameters to describe hardware capabilities
> > > - do not use references for pwm and iio timer subnodes
> > > 
> > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
> > > ---
> > >  arch/arm/boot/dts/stm32f429.dtsi      | 333 +++++++++++++++++++++++++++++++++-
> > >  arch/arm/boot/dts/stm32f469-disco.dts |  28 +++
> > >  2 files changed, 360 insertions(+), 1 deletion(-)

[...]

If you're only commenting on a little piece of the patch, it's always
a good idea to trim the rest.

> > > diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
> > > index 8a163d7..df4ca7e 100644
> > > --- a/arch/arm/boot/dts/stm32f469-disco.dts
> > > +++ b/arch/arm/boot/dts/stm32f469-disco.dts
> > > @@ -81,3 +81,31 @@
> > >  &usart3 {
> > >  	status = "okay";
> > >  };
> > > +
> > > +&gptimer1 {
> > > +	status = "okay";
> > > +
> > > +	pwm1@0 {
> > > +		pinctrl-0	= <&pwm1_pins>;
> > > +		pinctrl-names	= "default";
> > > +		status = "okay";
> > > +	};
> > > +
> > > +	timer1@0 {
> > > +		status = "okay";
> > > +	};
> > > +};
> > 
> > This is a much *better* format than before.
> > 
> > I still don't like the '&' syntax though.
> 
> Please keep "&" format to match with existing nodes.

Right.  I wasn't suggesting that he differs from the current format in
*this* set.  I am suggesting that we change the format in a subsequent
set though.

> > > +&gptimer3 {
> > > +	status = "okay";
> > > +
> > > +	pwm3@0 {
> > > +		pinctrl-0	= <&pwm3_pins>;
> > > +		pinctrl-names	= "default";
> > > +		status = "okay";
> > > +	};
> > > +
> > > +	timer3@0 {
> > > +		status = "okay";
> > > +	};
> > > +};
> > 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux