Add the regulator supply properties needed by ADV7511 and ADV7533. Cc: devicetree@xxxxxxxxxxxxxxx Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 6532a59..00ce479 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -38,10 +38,18 @@ The following input format properties are required except in "rgb 1x" and - adi,input-justification: The input bit justification ("left", "evenly", "right"). +- avdd-supply: A common 1.8V supply that powers up the AVDD, DVDD and PVDD + pins. On ADV7511, it also feeds to the BGVDD pin. On ADV7533, it also powers + up the A2VDD pin. +- v3p3-supply: A 3.3V supply that powers up the pin called DVDD_3V on + ADV7511 and V3P3 on ADV7533. + The following properties are required for ADV7533: - adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should be one of 1, 2, 3 or 4. +- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be + either 1.2V or 1.8V. This supply is specific to ADV7533. Optional properties: -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html