From: Thang Nguyen <tqnguyen@xxxxxxx>
As per USB 2.0 link power management addendum ECN, table 1-2, page 4,
device or host initiated via resume signaling; device-initiated resumes
can be optionally enabled/disabled by software. This patch adds support
to control enabling the USB2 RWE feature via DT/ACPI attribute.
Signed-off-by: Vu Nguyen <vnguyen@xxxxxxx>
Signed-off-by: Thang Nguyen <tqnguyen@xxxxxxx>
---
Documentation/devicetree/bindings/usb/usb-xhci.txt | 1 +
drivers/usb/host/xhci-plat.c | 3 +++
drivers/usb/host/xhci.c | 5 ++++-
drivers/usb/host/xhci.h | 1 +
4 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index 966885c..9b4cd14 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -25,6 +25,7 @@ Required properties:
Optional properties:
- clocks: reference to a clock
+ - usb2-rwe-disable: disable USB2 LPM Remote Wakeup capable
- usb3-lpm-capable: determines if platform is USB3 LPM capable
Example:
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index ed56bf9..15c540d 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -220,6 +220,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
goto disable_clk;
}
+ if (device_property_read_bool(&pdev->dev, "usb2-rwe-disable"))
+ xhci->quirks |= XHCI_RWE_DISABLE;
+
if (device_property_read_bool(&pdev->dev, "usb3-lpm-capable"))
xhci->quirks |= XHCI_LPM_SUPPORT;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 1a4ca02..f804868 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4183,7 +4183,10 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
}
pm_val &= ~PORT_HIRD_MASK;
- pm_val |= PORT_HIRD(hird) | PORT_RWE | PORT_L1DS(udev->slot_id);
+ if ((xhci->quirks & XHCI_RWE_DISABLE) && (xhci->hci_version <= 0x100))
+ pm_val |= PORT_HIRD(hird) | PORT_L1DS(udev->slot_id);
+ else
+ pm_val |= PORT_HIRD(hird) | PORT_RWE | PORT_L1DS(udev->slot_id);
writel(pm_val, pm_addr);
pm_val = readl(pm_addr);
pm_val |= PORT_HLE;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index f945380..2b9bc33 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1656,6 +1656,7 @@ struct xhci_hcd {
#define XHCI_SSIC_PORT_UNUSED (1 << 22)
#define XHCI_NO_64BIT_SUPPORT (1 << 23)
#define XHCI_MISSING_CAS (1 << 24)
+#define XHCI_RWE_DISABLE (1 << 25)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
