Add the dwc3 usb needed node information for rk3399.
Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
---
Somewhat rewritten from Caesar's reposting (v2) of my patch.
Changes:
* Include USB2 PHY (which is now in -next)
* Don't include USB3 PHY, as extcon support is not ready yet
* Drop non-upstream properties
* Fixup whitespace a bit
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 60 ++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 4ca8f9a7601c..1e97fb8c6415 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -316,6 +316,66 @@
};
};
+ usbdrd3_0: usb@fe800000 {
+ compatible = "rockchip,rk3399-dwc3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
+ <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
+ <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+ clock-names = "clk_usb3otg0_ref", "clk_usb3otg0_suspend",
+ "aclk_usb3otg0", "aclk_usb3_rksoc_axi_perf",
+ "aclk_usb3", "aclk_usb3_grf";
+ resets = <&cru SRST_A_USB3_OTG0>;
+ reset-names = "usb3-otg";
+ status = "disabled";
+
+ usbdrd_dwc3_0: dwc3 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xfe800000 0x0 0x100000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
+ dr_mode = "otg";
+ phys = <&u2phy0_otg>;
+ phy-names = "usb2-phy";
+ snps,dis_enblslpm_quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ status = "disabled";
+ };
+ };
+
+ usbdrd3_1: usb@fe900000 {
+ compatible = "rockchip,rk3399-dwc3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
+ <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
+ <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+ clock-names = "clk_usb3otg1_ref", "clk_usb3otg1_suspend",
+ "aclk_usb3otg1", "aclk_usb3_rksoc_axi_perf",
+ "aclk_usb3", "aclk_usb3_grf";
+ resets = <&cru SRST_A_USB3_OTG1>;
+ reset-names = "usb3-otg";
+ status = "disabled";
+
+ usbdrd_dwc3_1: dwc3 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xfe900000 0x0 0x100000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+ dr_mode = "otg";
+ phys = <&u2phy1_otg>;
+ phy-names = "usb2-phy";
+ snps,dis_enblslpm_quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ status = "disabled";
+ };
+ };
+
usb_host0_ehci: usb@fe380000 {
compatible = "generic-ehci";
reg = <0x0 0xfe380000 0x0 0x20000>;
--
2.8.0.rc3.226.g39d4020
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
