Re: [PATCH v6 3/5] Documentation: synopsys-dw-mshc: add binding for fifo quirks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




2016-11-24 10:19 GMT+08:00 Jun Nie <jun.nie@xxxxxxxxxx>:
> 2016-11-18 14:29 GMT+08:00 Jun Nie <jun.nie@xxxxxxxxxx>:
>> Add fifo-addr property and fifo-watermark-quirk property to
>> synopsys-dw-mshc bindings. It is intended to provide more
>> dt interface to support SoCs specific configuration.
>>
>> Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx>
>> ---
>>  Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 13 +++++++++++++
>>  1 file changed, 13 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
>> index 4e00e85..8bf2e41 100644
>> --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
>> +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
>> @@ -76,6 +76,17 @@ Optional properties:
>>
>>  * broken-cd: as documented in mmc core bindings.
>>
>> +* data-addr: Override fifo address with value provided by DT. The default FIFO reg
>> +  offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A) by
>> +  driver. If the controller does not follow this rule, please use this property
>> +  to set fifo address in device tree.
>> +
>> +* fifo-watermark-aligned: Data done irq is expected if data length is less than
>> +  watermark in PIO mode. But fifo watermark is requested to be aligned with data
>> +  length in some SoC so that TX/RX irq can be generated with data done irq. Add this
>> +  watermark quirk to mark this requirement and force fifo watermark setting
>> +  accordingly.
>> +
>>  * vmmc-supply: The phandle to the regulator to use for vmmc.  If this is
>>    specified we'll defer probe until we can find this regulator.
>>
>> @@ -103,6 +114,8 @@ board specific portions as listed below.
>>                 interrupts = <0 75 0>;
>>                 #address-cells = <1>;
>>                 #size-cells = <0>;
>> +               data-addr = <0x200>;
>> +               fifo-watermark-aligned;
>>         };
>>
>>  [board specific internal DMA resources]
>> --
>> 1.9.1
>>
> Hi Rob & Mark,
>
> Could you help review and act this patch if you think it is OK? Thank you!
>
> Jun


Hi Rob & Mark,

Could you help comment or act on this patch in revsion 6? Thank you!

Jun
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux