From: Yanjiang Jin <yanjiang.jin@xxxxxxxxxxxxx>
T4240QDS DMA controller uses the external DMA control signals to start or
restart a paused DMA transfer, acknowledge a DMA transfer in progress and
also indicates a transfer completion.
"scatterlist copy" depends on these signals.
But as "T4240 Reference Manual" shown:
"The external DMA control signals are available on DMA1 and DMA2. They are
not supported by DMA3."
So add an of_node property "fsl,external-dma-control-signals" to only DMA1
and DMA2, it can prevent DMA3 from doing DMA_SG operations. Else we would
get the below errors during doing dmatest:
modprobe dmatest run=1 iterations=42
dmatest: Started 1 threads using dma2chan0
fsl-elo-dma ffe102300.dma: chan0: Transfer Error!
fsl-elo-dma ffe102300.dma: chan0: irq: unhandled sr 0x00000080
dmatest: dma2chan0-sg0: dstbuf[0x3954] not copied! Expected d8, got 2b
........................
dmatest: dma2chan7-sg0: dstbuf[0x1c51] not copied! Expected df, got 2e
dmatest: dma2chan7-sg0: 1301 errors suppressed
dmatest: dma2chan7-sg0: result #42: 'data error' with
src_off=0xf21 dst_off=0x1c32 len=0x535 (1333)
dmatest: dma2chan7-sg0: summary 42 tests, 42 failures 2952 iops 23968 KB/s
Signed-off-by: Yanjiang Jin <yanjiang.jin@xxxxxxxxxxxxx>
---
arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 6 ++++++
drivers/dma/fsldma.c | 11 +++++++++--
2 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index 68c4ead..155997d 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -1029,7 +1029,13 @@
};
/include/ "elo3-dma-0.dtsi"
+ dma@100300 {
+ fsl,external-dma-control-signals;
+ };
/include/ "elo3-dma-1.dtsi"
+ dma@101300 {
+ fsl,external-dma-control-signals;
+ };
/include/ "elo3-dma-2.dtsi"
/include/ "qoriq-espi-0.dtsi"
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 51c75bf..f7054f4 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -1354,12 +1354,19 @@ static int fsldma_of_probe(struct platform_device *op)
fdev->irq = irq_of_parse_and_map(op->dev.of_node, 0);
dma_cap_set(DMA_MEMCPY, fdev->common.cap_mask);
- dma_cap_set(DMA_SG, fdev->common.cap_mask);
+
dma_cap_set(DMA_SLAVE, fdev->common.cap_mask);
+
+ if (of_get_property(op->dev.of_node,
+ "fsl,external-dma-control-signals", NULL)) {
+ dma_cap_set(DMA_SG, fdev->common.cap_mask);
+ fdev->common.device_prep_dma_sg = fsl_dma_prep_sg;
+ } else
+ dma_cap_clear(DMA_SG, fdev->common.cap_mask);
+
fdev->common.device_alloc_chan_resources = fsl_dma_alloc_chan_resources;
fdev->common.device_free_chan_resources = fsl_dma_free_chan_resources;
fdev->common.device_prep_dma_memcpy = fsl_dma_prep_memcpy;
- fdev->common.device_prep_dma_sg = fsl_dma_prep_sg;
fdev->common.device_tx_status = fsl_tx_status;
fdev->common.device_issue_pending = fsl_dma_memcpy_issue_pending;
fdev->common.device_config = fsl_dma_device_config;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
