On Mon, Nov 28, 2016 at 5:59 PM, Icenowy Zheng <icenowy@xxxxxxxx> wrote: > As there's currently a fork of U-Boot which provides simplefb support Please add it when its finalized... > for H3, a simplefb node can be added to the device tree. > > Signed-off-by: Icenowy Zheng <icenowy@xxxxxxxx> > --- > > I'm still not sure which pipeline should I use. You are supposed to add _all_ the pipelines that are available and supported by U-boot. U-boot is then supposed to enable and update the one it set up. ChenYu > > And, it seems that HDMI Slow Clock is not needed? > > (seems that it's only for EDID, but simplefb won't use EDID) > > arch/arm/boot/dts/sun8i-h3.dtsi | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi > index 75a8654..cacc8dd 100644 > --- a/arch/arm/boot/dts/sun8i-h3.dtsi > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi > @@ -50,6 +50,22 @@ > / { > interrupt-parent = <&gic>; > > + chosen { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + simplefb_hdmi: framebuffer@0 { > + compatible = "allwinner,simple-framebuffer", > + "simple-framebuffer"; > + allwinner,pipeline = "de0-lcd0-hdmi"; > + clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_BUS_DE>, > + <&ccu CLK_BUS_HDMI>, <&ccu CLK_DE>, > + <&ccu CLK_TCON0>, <&ccu CLK_HDMI>; > + status = "disabled"; > + }; > + }; > + > cpus { > #address-cells = <1>; > #size-cells = <0>; > -- > 2.10.2 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html