The i.MX6UL internal touchscreen controller contains an option to average upon samples. This feature reduces noise from the produced touch locations. This patch introduces a new device tree optional property for this feature. It provides control over the amount of averaged samples per touch event. The property was inspired by a similar property on the "brcm,iproc-touchscreen" binding. Signed-off-by: Guy Shapiro <guy.shapiro@xxxxxxxxxxxxx> --- .../devicetree/bindings/input/touchscreen/imx6ul_tsc.txt | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt index 853dff9..a66069f 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt @@ -17,6 +17,13 @@ Optional properties: This value depends on the touch screen. - pre-charge-time: the touch screen need some time to precharge. This value depends on the touch screen. +- average-samples: Number of data samples which are averaged for each read. + Valid values 0-4 + 0 = 1 sample + 1 = 4 samples + 2 = 8 samples + 3 = 16 samples + 4 = 32 samples Example: tsc: tsc@02040000 { @@ -32,5 +39,6 @@ Example: xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; measure-delay-time = <0xfff>; pre-charge-time = <0xffff>; + average-samples = <4>; status = "okay"; }; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html