On Wed, Nov 23, 2016 at 4:07 PM, Zhangfei Gao <zhangfei.gao@xxxxxxxxxx> wrote: > Add DT bindings documentation for hi3660 SoC reset controller. > > Signed-off-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx> > --- > .../bindings/reset/hisilicon,hi3660-reset.txt | 51 ++++++++++++++++++++++ > 1 file changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt > > diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt > new file mode 100644 > index 0000000..250daf2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt > @@ -0,0 +1,51 @@ > +Hisilicon System Reset Controller > +====================================== > + > +Please also refer to reset.txt in this directory for common reset > +controller binding usage. > + > +The reset controller registers are part of the system-ctl block on > +hi3660 SoC. > + > +Required properties: > +- compatible: should be > + "hisilicon,hi3660-reset" > +- #reset-cells: 1, see below > +- hisi,rst-syscon: phandle of the reset's syscon. > +- hisi,reset-bits: Contains the reset control register information > + Should contain 2 cells for each reset exposed to > + consumers, defined as: > + Cell #1 : offset from the syscon register base > + Cell #2 : bits position of the control register > + > +Example: > + iomcu: iomcu@ffd7e000 { > + compatible = "hisilicon,hi3660-iomcu", "syscon"; > + reg = <0x0 0xffd7e000 0x0 0x1000>; > + }; > + > + iomcu_rst: iomcu_rst_controller { > + compatible = "hisilicon,hi3660-reset"; > + #reset-cells = <1>; > + hisi,rst-syscon = <&iomcu>; > + hisi,reset-bits = <0x20 0x8 /* 0: i2c0 */ > + 0x20 0x10 /* 1: i2c1 */ > + 0x20 0x20 /* 2: i2c2 */ > + 0x20 0x8000000>; /* 3: i2c6 */ > + }; > + > +Specifying reset lines connected to IP modules > +============================================== > +example: > + > + i2c0: i2c@..... { > + ... > + resets = <&iomcu_rst 0>; > + ... > + }; > + > + i2c1: i2c@..... { > + ... > + resets = <&iomcu_rst 1>; > + ... > + }; > -- > 2.7.4 Sorry, missing cc when send-email. Help take a look. Thanks -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html