Hi, While we now support the internal display pipeline found on sun6i, it is possible that we are unable to enable the display for some boards, due to a lack of drivers for the panels or bridges found on them. If the display pipeline is enabled, the driver will try to enable, and possibly screw up the simple framebuffer U-boot had configured. This series disables the display pipeline by default, and re-enables it for the A31 Hummingbird, which already had its display pipeline enabled. The series can go in after 4.10-rc1, as a fix, but should not be delayed till the next release. Regards ChenYu Chen-Yu Tsai (2): ARM: dts: sun6i: Disable display pipeline by default ARM: dts: sun6i: hummingbird: Enable display engine again arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 4 ++++ arch/arm/boot/dts/sun6i-a31.dtsi | 1 + 2 files changed, 5 insertions(+) -- 2.10.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
