OK, I will create a "mode" string property in the devicetree that can be "master" or "slave". Thank you all, Luis On 18-Nov-16 17:01, Rob Herring wrote: > On Fri, Nov 18, 2016 at 02:35:52PM +0200, Andy Shevchenko wrote: >> On Fri, 2016-11-18 at 11:19 +0000, Luis Oliveira wrote: >>> - Add slave defintitions to i2c-designware-core >>> - Changes in Kconfig to auto-enable I2C_SLAVE when compiling the >>> modules >>> - Add compatible string to designware-core.txt explaining the >>> devicetree bindings >>> >> >>> --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt >>> +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt >>> @@ -2,7 +2,9 @@ >>> >>> Required properties : >>> >>> - - compatible : should be "snps,designware-i2c" >>> + - compatible : should be: >>> + - "snps,designware-i2c" to setup the hardware block as I2C master. >>> + - "snps,designware-i2c-slave" to setup the hardware block as I2C >>> slave. >> Not sure about this one. >> >> Compatible string is more generic than list of modes. Basically you have >> to add a property which selects mode. > Yes, agreed. And come up with a common property. > >> DT people's ACK is a must for this change. >> >> >> --- a/drivers/i2c/busses/Kconfig >>> +++ b/drivers/i2c/busses/Kconfig >>> @@ -470,6 +470,7 @@ config I2C_DESIGNWARE_CORE >>> config I2C_DESIGNWARE_PLATFORM >>> tristate "Synopsys DesignWare Platform" >>> select I2C_DESIGNWARE_CORE >>> + select I2C_SLAVE >>> >> Common rule, generic dependencies usually go first >> >> select I2C_SLAVE >> select I2C_DESIGNWARE_CORE >> >> -- >> Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> >> Intel Finland Oy -- Best regards, Luis -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html